Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 1 subscriber
  • Views 10270 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Setting Up OWA and Outlook Anywhere

DingDuck
Hi All.

I'm a new Astaro user and am loving it so far.
I would like to know if there's a step by step guide on setting up OWA and OA so I can publish it to the outside world.

I currently have this in place on an ISA server but am not sure where to start with the Astaro appliance.

Appreciate any advice that you guys (and gals) can provide


This thread was automatically locked due to age.
Parents
  • 0
    The 'Hostname' of the Astaro should be the FQDN that resolves to the IP of the external interface of your Astaro.  Our standard is: mail.domainname.com.

    Put an additional address on the external interface named, for example: Outlook.  Have a new DNS record created that points to it.  Our standard is: outlook.domainname.com.

    Create a DNAT rule:

    Traffic Source:  Any 
    Traffic Service:  HTTPS
    Traffic Destination:  External [Outlook] (Address)
    NAT mode: DNAT (Destination)
    Destination: {Host definition of OWA/OMA server}
    Destination Service: {leave blank}
    Automatic packet filter rule: {checked}



    Create a DNS entry either in your internal DNS server or on the 'Static Entries' tab of 'DNS' in the Astaro: 'outlook.domainname.com -> {Host definition of OWA/OMA server}'.  Now you can access OWA from inside or outside with: https://outlook.domainname.com/exchange/

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    The 'Hostname' of the Astaro should be the FQDN that resolves to the IP of the external interface of your Astaro.  Our standard is: mail.domainname.com.

    Put an additional address on the external interface named, for example: Outlook.  Have a new DNS record created that points to it.  Our standard is: outlook.domainname.com.

    Create a DNAT rule:

    Traffic Source:  Any 
    Traffic Service:  HTTPS
    Traffic Destination:  External [Outlook] (Address)
    NAT mode: DNAT (Destination)
    Destination: {Host definition of OWA/OMA server}
    Destination Service: {leave blank}
    Automatic packet filter rule: {checked}



    Create a DNS entry either in your internal DNS server or on the 'Static Entries' tab of 'DNS' in the Astaro: 'outlook.domainname.com -> {Host definition of OWA/OMA server}'.  Now you can access OWA from inside or outside with: https://outlook.domainname.com/exchange/

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
Unfiltered HTML