Able to establish a connection between sites, but cannot route traffic back and forth to see devices on each side. Cant ping any devices on either end.
Able to establish a connection between sites, but cannot route traffic back and forth to see devices on each side. Cant ping any devices on either end.
I really struggled with that as well. The only way I found to get through was to add a NAT rule that says any traffic coming in on the SSL VPN tunnel should be SNAT'd to look like it came from the internal network.
This was also the golden ticket for IPSec, PPTP, and L2TP. But in the case of PPTP and L2TP, where all traffic goes through the UTM, two NAT rules are required; one for the local network that SNAT's the source to the LAN address and one for everything else that SNAT's the source to the external WAN address.
Able to establish a connection between sites, but cannot route traffic back and forth to see devices on each side. Cant ping any devices on either end.
I really struggled with that as well. The only way I found to get through was to add a NAT rule that says any traffic coming in on the SSL VPN tunnel should be SNAT'd to look like it came from the internal network.
This was also the golden ticket for IPSec, PPTP, and L2TP. But in the case of PPTP and L2TP, where all traffic goes through the UTM, two NAT rules are required; one for the local network that SNAT's the source to the LAN address and one for everything else that SNAT's the source to the external WAN address.
