Able to establish a connection between sites, but cannot route traffic back and forth to see devices on each side. Cant ping any devices on either end.
Do you have local and remote networks set properly on both sides? Is each sides internal networks that you're trying to connect addressed as different subnets (one side 192.168.1.x and the other 192.168.2.x, for example)? Are you using automatic firewall rules? Are you trying to connect by IP, FQDN, or hostname?
__________________ ACE v8/SCA v9.3
...still have a v5 install disk in a box somewhere.
To answer both your questions both UTM's are running 9.310-11
Both local subnets are different on both sides one is 10.3.10.0, the other is 10.1.0.0, automatic firewall rules are set on each side, when I connect I connect by each sides public ip.
Using UDP as opposed to TCP.
I also followed these instructions on how to initially setup the Site to Site SSL VPN.
To answer both your questions both UTM's are running 9.310-11
Both local subnets are different on both sides one is 10.3.10.0, the other is 10.1.0.0, automatic firewall rules are set on each side, when I connect I connect by each sides public ip.
Using UDP as opposed to TCP.
I also followed these instructions on how to initially setup the Site to Site SSL VPN.
