This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RDP via VPN ssl remote access

hallo,
I have a problem. How do I do to allow rdp with vpn?
pool vpn has been changed, it is 192.168.2.6 and lan 192.168.2.0.
The ping from vpn to lan doesn't work

thanks

This thread was automatically locked due to age.

Parents

0 Scott_Klassen over 14 years ago

I recall that Bob.  I was answering based on the available info.  [:)]

Marge:  I agree with Bob, changing the VPN pool back to the original will help a bit in diagnosing and solving this issue for you.  Then you can check your packet filter rules to allow traffic between the VPN pool addresses and your internal LAN.

A couple of other thing come to mind as well.
1)  A MASQ rule from VPN Pool --> Internal LAN
2)  Under Remote Access have you entered your Internal network as a Local Network?

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel
0 Marge over 14 years ago in reply to Scott_Klassen

Hallo,
I have set a default VPN pool 10.242.2.0/24.
The webproxy and IM/P2P are disable,
see the print screen.
If you need a more print screen, ask me.
doe
- 4.jpg
- View
- Hide
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Marge over 14 years ago in reply to Scott_Klassen

Hallo,
I have set a default VPN pool 10.242.2.0/24.
The webproxy and IM/P2P are disable,
see the print screen.
If you need a more print screen, ask me.
doe
- 4.jpg
- View
- Hide
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data