This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RDP via VPN ssl remote access

hallo,  
I have a problem. How do I do to allow rdp with vpn?  
pool vpn has been changed, it is 192.168.2.6 and lan 192.168.2.0.  
The ping from vpn to lan doesn't work  
  
thanks


This thread was automatically locked due to age.
Parents
  • I recall that Bob.  I was answering based on the available info.  [:)]
     
    Marge:  I agree with Bob, changing the VPN pool back to the original will help a bit in diagnosing and solving this issue for you.  Then you can check your packet filter rules to allow traffic between the VPN pool addresses and your internal LAN.
     
    A couple of other thing come to mind as well.
    1)  A MASQ rule from VPN Pool --> Internal LAN
    2)  Under Remote Access have you entered your Internal network as a Local Network?
    __________________
    ACE v8/SCA v9.3

    ...still have a v5 install disk in a box somewhere.

    http://xkcd.com
    http://www.tedgoff.com/mb
    http://www.projectcartoon.com/cartoon/1
Reply
  • I recall that Bob.  I was answering based on the available info.  [:)]
     
    Marge:  I agree with Bob, changing the VPN pool back to the original will help a bit in diagnosing and solving this issue for you.  Then you can check your packet filter rules to allow traffic between the VPN pool addresses and your internal LAN.
     
    A couple of other thing come to mind as well.
    1)  A MASQ rule from VPN Pool --> Internal LAN
    2)  Under Remote Access have you entered your Internal network as a Local Network?
    __________________
    ACE v8/SCA v9.3

    ...still have a v5 install disk in a box somewhere.

    http://xkcd.com
    http://www.tedgoff.com/mb
    http://www.projectcartoon.com/cartoon/1
Children