Webfilter Websites are not opening

Hi Sally,

Please show one line each from the Web Filter log for blocks of xoco.no and www.viennatour.at.

Cheers - Bob

Hello Bob,

there are no blocks for xoco.no and www.viennatour.at in the Webfilter Log.

What else I can check?

Thx

Regards

Sally

what IP have eth2 and VPN Router?
eth2 must use the VPN Router IP as gateway, and the VPN Router makes the connection (If I understood the schema)

Hello Oldeda,

yes, the VPN Router makes the connection. 

eth2 IP

10.0.0.1 /24

VPN Router 

10.0.0.5 /24

GW: 10.0.0.1

Eth2 Gateway must be the VPN router ip

Hello,

after your recommendation, to set router IP as Gateway for eth2 the Internet Connection works. When checking with traceroute, the internet traffic goes over the vpn tunnel to internet, thats perfect.

But the following pages still not work:

salsanena.at

viennatour.at

xoco.no

Please see attached the masquerading rules, they are still active, do I have to change there yet also something?

Thx

Sally

ping those pages directly from UTM with their name not IP. Maybe is a DNS broblem. Or maybe skip those host in Web Filter to not check anything.

One problem at a time [:D]

Ok, pinging the 3 Pages above from UTM over VPN Interface, there is no reply. Pinging other working websites I get an reply .

Doing nslookup from Client, the DNS Resolution for the none working websites is working.

Where can i try to skip the host from webfilter?

Thx

Masquerading must be only 2 for internals networks Internal -> Uplink Interfaces. DMZ Media - Uplink Interfaces
UTM will decide what to masquerade based on Multipath Routes and Priority in Uplink Balancing. Maybe you still have a policy route or static route there. And this can cause loopback proxy problems

Ok, I adapted the masquerading. But I have to leave also the rule Internal Network - DMZ Media, otherwise the RDP Connection to the media server isn't working ..

Can you please tell me where I can exactly take out the filtering from Webfilter, to test if the problem comes from the Filter??

Thx

Sally

Under Interfaces - Uplink Balancing active Interfaces are the External (WAN) and second the DMZ VPN are included, do I have to sort there the interfaces like DMZ VPN first, and after the External (WAN) or is this not relevant?

Since you made the Multipath Rules it is not necessary sorting. 

If You cant ping those pages from UTM the problem isn't in the web filter. I checked and the 3 pages respond to ping, two are hosted in Austria and one in USA

Now the problem is excluded from webfilter, because ping has nothing to do with it. Is there any NAT Rules, Firewall Rules or Country Blocking?

Since you made the Multipath Rules it is not necessary sorting. 

If You cant ping those pages from UTM the problem isn't in the web filter. I checked and the 3 pages respond to ping, two are hosted in Austria and one in USA

Now the problem is excluded from webfilter, because ping has nothing to do with it. Is there any NAT Rules, Firewall Rules or Country Blocking?

I checked, there is no NAT Rule, Country Blocking is activated but off for Austria and United States. Firewall Rules are:

Internal - Any - DMZ VPN (Network)

DMZ VPN Network - DNS, FTP, HTTP, HTTPS, NTP, PING - Internet IPv4

What I have still set from the previous Configuration is: 

Web Protection - Filtering Options - Misc - Skip Transparent Source Mode Hosts / Nets - and have there defined Laptop, Phones, Printer etc.

Defined there the DNS Hosts for the 3 Websites, still not opening. Other websites still work 

whren you ping those hosts from your PC and UTM, what is the response can you printscreen both photos here

Hello,

please see here the results..

First 2 are from PC

Following 2 from UTM over VPN Interface

I see that:

DNS resolves OK

You Ping other websites, it means that UTM allows ping.

It is very strange. And the only thing or the last, is that your IP is blacklisted.

Hi Oldeda,

I checked yet again, and found out that my IP over the Tunnel from another country is working, and the websites are perfectly open.

Thanks a Lot for your great Help!

Best Regards

Sally

You are wellcome