Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 2 subscribers
  • Views 12913 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SIP and Multiple WAN

san_narula
I have just set it up as per this post but when I go to the flow monitor for the 3x external interfaces, I see SIP and RTP traffic in all of them. How do I force it to go through the SHDSL only and not the other two ADSL connections we have?


This thread was automatically locked due to age.
Parents
  • 0
    Hi Scott,

    I thought it is somewhat related to QoS but of course it wasn't.

    I have setup multipath rule but the results are still the same. Can you please tell me what I am doing wrong, this is my configuration.

    Name: Multipath Rule for PBX 
    Position: 1
    Source: PBX Server DNS address
    Service: Any
    Destination: Any IPv4
    Itf. Persistence: by Interface
    Bind interface: SHDSL BB
Reply
  • 0
    Hi Scott,

    I thought it is somewhat related to QoS but of course it wasn't.

    I have setup multipath rule but the results are still the same. Can you please tell me what I am doing wrong, this is my configuration.

    Name: Multipath Rule for PBX 
    Position: 1
    Source: PBX Server DNS address
    Service: Any
    Destination: Any IPv4
    Itf. Persistence: by Interface
    Bind interface: SHDSL BB
Children
No Data
Unfiltered HTML