This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SIP and Multiple WAN

I have just set it up as per this post but when I go to the flow monitor for the 3x external interfaces, I see SIP and RTP traffic in all of them. How do I force it to go through the SHDSL only and not the other two ADSL connections we have?

This thread was automatically locked due to age.

0 Scott_Klassen over 9 years ago

@san_narula: This thread is ONLY about QoS for SIP. Your question has nothing to do with QoS, next time make a new thread for new topics.

That being said, you can achieve what you want with the use of Uplink Balancing and Multipath Rules. There's some articles on these available at https://secure2.sophos.com/en-us/support/knowledgebase/b/2450/2600/4000.aspx

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel
0 san_narula over 9 years ago

Hi Scott,

I thought it is somewhat related to QoS but of course it wasn't.

I have setup multipath rule but the results are still the same. Can you please tell me what I am doing wrong, this is my configuration.

Name: Multipath Rule for PBX
Position: 1
Source: PBX Server DNS address
Service: Any
Destination: Any IPv4
Itf. Persistence: by Interface
Bind interface: SHDSL BB
Cancel
Vote Up 0 Vote Down

Cancel