Good day!
I have a question. We are working with a customer and for some reason the NAT is not working. This is the scenario.
We have an IPSec tunnel between two sites. We need to NAT one of Sopho's interfaces since it's doing an integration with an active directory on the other end.
Here is the topology
Customer LAN ---- Sophos =========VPN S2S ======== Azure ------ Remote LAN
The ip address that needs to be translated is one of the logical ports that is connected directly into the customer's LAN. We setup the configuration as a normal NAT and for some reason the NAT is not happening.
We know this because we translated another IP address (inside customer's LAN) and worked fine. I am starting to think that Sophos does not allow NAT when one of its interfaces is used. Can someone help me on this particular scenario?
thanks a lot!
This thread was automatically locked due to age.
