Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 2 subscribers
  • Views 2707 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hardware logging not working (UTM220 rev5 - 9.004-34)

OntarioTech
Hello,

I just upgraded from v8/rev2 220's to v9/rev5 220's.  Everything went smooth, but I noticed that if I got to Logging & Reporting > Hardware, the graphs all show 0% flat.  On the Dashboard Resource Usage, however, it shows (e.g.) 8% cpu, 82% of 2GB ram, 7% log disk, and 10% data disk.

Any ideas on why the graphs in the logging and reporting section are not working?


This thread was automatically locked due to age.
Parents
  • 0
    Ah, a week ago.  I have a support ticket open for one client with this problem.  All but two others are still on V8 for now.  Neither of the other two on V9.004 is experiencing this problem.

    We rebuilt the databases for the one with this issue, but that didn't fix the problem.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson
    Hi,

    Have you been able to resolve the issue?  I have the same problem with my installation at home.
Reply Children
No Data
Unfiltered HTML