Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 11 replies
  • Subscribers 6 subscribers
  • Views 15635 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

can not use ASG software

kuno

Hi All,

what do i Need to do here? I have no root or Login Passwords?

 

 

Thanks



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    you will have to apply for a new licence, not renew. Re-install add your licence. Change the date on the system so that you old licence is still valid do a restore while keeping the machine off line then apply your new licence and you should by right to go again.

    This is theory because I have never let my home licences expire.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    Hi

    Thank you so much for your answer. I downloded v9.5 and burned DVD. unfortunattly i cant get Signal VGA. I cant see what System says . I tried to blind Installation but no success .is there way can i take without VGA? or Adapter i can buy?

     

    Thank you so much in advance.

  • 0 in reply to kuno

    Further to this I assume you have had your home licence working on the ASG420 before?

    I don't know enough about the SG or XG series of hardware, one of the more experienced people who done this before will need to assist.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    No, this machine i bought from EBAY (utm 425) ,saler just has done Factory reset .of couse old sofware v9 is on it. you are right ,i Need to erase all and reinstall it ,but i did not succed

     

    :( 

  • 0 in reply to kuno

    of Course VGA Problem is another Thing. if i cant see then very difficult solution search. 

  • 0 in reply to rfcat_vk

    can i install sofware on a Normal PC ?  I mean i take UTM HARDDISK out and install the same HDD on normal PC. after that HDD again UTM build.

    of Course HARDWARE will be diffrent ,but my be sync automatically 

     

    is it possible?

  • +1 in reply to kuno

    You will need to reset the bios so that it stops thinking it is an SG UTM. You will need the special cable. You could try searching the web or install to a HDD and see if it works but you will need to change the hardware settings.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • +1 in reply to kuno

    You will need to reset the bios so that it stops thinking it is an SG UTM. You will need the special cable. You could try searching the web or install to a HDD and see if it works but you will need to change the hardware settings.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
Unfiltered HTML