Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 9 replies
  • Subscribers 5 subscribers
  • Views 18530 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos UTM home edition 9.3 NIC showing as Down

krishnagummadapu

Hi,

After my previous question, I moved away from USB NIC and installed SOPHOS UTM on my old PC that can take PCI-E cards.

SO purchased a second NIC. 

After installing I was able to browse the Web interface and set the password. all good. Now logged in and only see one Interface eth0 which is what i selected for web interface. Added second interface eth1from Interfaces tab. But unfortunately it is showing as down.

Reinstalled SOPHOS again by selecting eth1 as the web interface and did the initial setup. When logged in Only see one interface eth1. Added second interface but again eth0 showing as down.

Both interfaces are connected but one showing as down.

how do i fix the issue.

Thank you,

Krishna



This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to krishnagummadapu

    You have to enable the interface. Just click on the grey switch icon...

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Children
Unfiltered HTML