Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 6 subscribers
  • Views 1257 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

New Setup

Lawrence Grim

I have UTM 9.7, and setup on a inexpensive PC, with 8GB memory/1TB drive, an motherboard Intel Ethernet eth0 and dual-port Intel Ethernet NIC (eth1/eth2).

Setup with eth0 as 10.0.0.2,  Can connect to WebAdmin interface from 10.0.0.2:4444, and registered the  "home only" license.  The eth1 connection in the console shows the link up for eth1 connected to the ISP.

However, when trying to use the Win10 client (previously used for the UTM home WebAdmin interface) cannot http to any other URL.

Rather than move question by question, is there an installation guide for the UTM home setup/use?



This thread was automatically locked due to age.
Parents
  • 0

    Fixed, thanks to community forum!
    1- support > tools > DNS typed in google.com and that worked.
    2- workstation-

    Problem was when static coded NIC & DNS on the client and did not let the UTM DHCP assign values.

    Sorry for any inconvenience.

    Larry

Reply
  • 0

    Fixed, thanks to community forum!
    1- support > tools > DNS typed in google.com and that worked.
    2- workstation-

    Problem was when static coded NIC & DNS on the client and did not let the UTM DHCP assign values.

    Sorry for any inconvenience.

    Larry

Children
No Data
Unfiltered HTML