Hello,
I Have an APX320. It won´t work.
It do an Boot Loop
Error Message in Log:
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Read 0 bytes from volume image_backup to 88000000
No size specified -> Using max size (126976)
Wrong Image Format for bootm command
ERROR: can't get kernel image!
eth0 PHY0 Down Speed :10 Half duplex
data abort
UBI: attached mtd2 to ubi0 UBI: MTD device name: "mtd=0" UBI: MTD device size: 512 MiB UBI: number of good PEBs: 4096 UBI: number of bad PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 3 UBI: available PEBs: 2696 UBI: total number of reserved PEBs: 1400 UBI: number of PEBs reserved for bad PEB handling: 40 UBI: max/mean erase counter: 12/4 SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB Hit any key to stop autoboot: 0 Read 0 bytes from volume image to 88000000 No size specified -> Using max size (67170304) Wrong Image Format for bootm command ERROR: can't get kernel image! Read 0 bytes from volume image_backup to 88000000 No size specified -> Using max size (126976) Wrong Image Format for bootm command ERROR: can't get kernel image! eth0 PHY0 Down Speed :10 Half duplex data abort pc : [<8733e7e0>] lr : [<8733e794>] sp : 871efc38 ip : 00000000 fp : 00000000 r10: 8735e14f r9 : 00000000 r8 : 871eff60 r7 : 88000000 r6 : 00000000 r5 : 871efc54 r4 : 88000000 r3 : fffffff8 r2 : 00000004 r1 : 00000000 r0 : 87ffffff Flags: NzCv IRQs off FIQs off Mode SVC_32 Resetting CPU ... resetting ... Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00108 S - IMAGE_VARIANT_STRING=DAABANAZA S - OEM_IMAGE_VERSION_STRING=CRM S - Boot Config, 0x00000021 S - Reset status Config, 0x00000010 S - Core 0 Frequency, 0 MHz B - 261 - PBL, Start B - 1339 - bootable_media_detect_entry, Start B - 1679 - bootable_media_detect_success, Start B - 1692 - elf_loader_entry, Start B - 5069 - auth_hash_seg_entry, Start B - 7213 - auth_hash_seg_exit, Start B - 578544 - elf_segs_hash_verify_entry, Start B - 694724 - PBL, End B - 694748 - SBL1, Start B - 785082 - pm_device_init, Start D - 7 - pm_device_init, Delta B - 786608 - boot_flash_init, Start D - 79857 - boot_flash_init, Delta B - 870610 - boot_config_data_table_init, Start D - 3839 - boot_config_data_table_init, Delta - (419 Bytes) B - 878086 - clock_init, Start D - 7566 - clock_init, Delta B - 889826 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:6 B - 893239 - sbl1_ddr_set_params, Start B - 898335 - cpr_init, Start D - 2 - cpr_init, Delta B - 902716 - Pre_DDR_clock_init, Start D - 5 - Pre_DDR_clock_init, Delta D - 13174 - sbl1_ddr_set_params, Delta B - 916028 - pm_driver_init, Start D - 3 - pm_driver_init, Delta B - 986580 - sbl1_wait_for_ddr_training, Start D - 27 - sbl1_wait_for_ddr_training, Delta B - 1002777 - Image Load, Start D - 138335 - QSEE Image Loaded, Delta - (269176 Bytes) B - 1141542 - Image Load, Start D - 1435 - SEC Image Loaded, Delta - (2048 Bytes) B - 1151835 - Image Load, Start D - 220012 - APPSBL Image Loaded, Delta - (450356 Bytes) B - 1372246 - QSEE Execution, Start D - 60 - QSEE Execution, Delta B - 1378468 - SBL1, End D - 685798 - SBL1, Delta S - Flash Throughput, 2007 KB/s (721999 Bytes, 359585 us) S - DDR Frequency, 672 MHz U-Boot 2012.07 (Dec 05 2017 - 16:05:06) smem ram ptable found: ver: 1 len: 3 DRAM: 512 MiB machid : 0x8010006 NAND: ONFI device found ID = 9590dcc2 Vendor = c2 Device = dc SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x400000 516 MiB In: serial Out: serial Err: serial machid: 8010006 flash_type: 0 Configurate GPIO setting Configurate TPM reset from low to high. Configurate BLE reset from low to high. Net: PHY ID = 0x4dd072, eth0 found AR8035 PHY MAC0 addr:7c:5a:1c:2:d0:b8 eth0 Creating 1 MTD partitions on "nand0": 0x000000000000-0x000020000000 : "mtd=0" UBI: attaching mtd2 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 126976 bytes UBI: smallest flash I/O unit: 2048 UBI: VID header offset: 2048 (aligned 2048) UBI: data offset: 4096 UBI: attached mtd2 to ubi0 UBI: MTD device name: "mtd=0" UBI: MTD device size: 512 MiB UBI: number of good PEBs: 4096 UBI: number of bad PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 3 UBI: available PEBs: 2696 UBI: total number of reserved PEBs: 1400 UBI: number of PEBs reserved for bad PEB handling: 40 UBI: max/mean erase counter: 12/4 SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB Hit any key to stop autoboot: 0 Read 0 bytes from volume image to 88000000 No size specified -> Using max size (67170304) Wrong Image Format for bootm command ERROR: can't get kernel image! Read 0 bytes from volume image_backup to 88000000 No size specified -> Using max size (126976) Wrong Image Format for bootm command ERROR: can't get kernel image! eth0 PHY0 Down Speed :10 Half duplex data abort pc : [<8733e7e0>] lr : [<8733e794>] sp : 871efc38 ip : 00000000 fp : 00000000 r10: 8735e14f r9 : 00000000 r8 : 871eff60 r7 : 88000000 r6 : 00000000 r5 : 871efc54 r4 : 88000000 r3 : fffffff8 r2 : 00000004 r1 : 00000000 r0 : 87ffffff Flags: NzCv IRQs off FIQs off Mode SVC_32 Resetting CPU ... resetting ... Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00108 S - IMAGE_VARIANT_STRING=DAABANAZA S - OEM_IMAGE_VERSION_STRING=CRM S - Boot Config, 0x00000021 S - Reset status Config, 0x00000010 S - Core 0 Frequency, 0 MHz B - 261 - PBL, Start B - 1339 - bootable_media_detect_entry, Start B - 1679 - bootable_media_detect_success, Start B - 1693 - elf_loader_entry, Start B - 5069 - auth_hash_seg_entry, Start B - 7213 - auth_hash_seg_exit, Start B - 578571 - elf_segs_hash_verify_entry, Start B - 694773 - PBL, End B - 694797 - SBL1, Start B - 785131 - pm_device_init, Start D - 7 - pm_device_init, Delta B - 786658 - boot_flash_init, Start D - 79866 - boot_flash_init, Delta B - 870669 - boot_config_data_table_init, Start D - 3839 - boot_config_data_table_init, Delta - (419 Bytes) B - 877884 - clock_init, Start D - 7586 - clock_init, Delta B - 889969 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:6 B - 893383 - sbl1_ddr_set_params, Start B - 898480 - cpr_init, Start D - 2 - cpr_init, Delta B - 902862 - Pre_DDR_clock_init, Start D - 4 - Pre_DDR_clock_init, Delta D - 13175 - sbl1_ddr_set_params, Delta B - 916175 - pm_driver_init, Start D - 3 - pm_driver_init, Delta B - 986989 - sbl1_wait_for_ddr_training, Start D - 27 - sbl1_wait_for_ddr_training, Delta B - 1003161 - Image Load, Start D - 138455 - QSEE Image Loaded, Delta - (269176 Bytes) B - 1142048 - Image Load, Start D - 1439 - SEC Image Loaded, Delta - (2048 Bytes) B - 1152348 - Image Load, Start D - 220180 - APPSBL Image Loaded, Delta - (450356 Bytes) B - 1372925 - QSEE Execution, Start D - 60 - QSEE Execution, Delta B - 1379146 - SBL1, End D - 686428 - SBL1, Delta S - Flash Throughput, 2006 KB/s (721999 Bytes, 359879 us) S - DDR Frequency, 672 MHz U-Boot 2012.07 (Dec 05 2017 - 16:05:06) smem ram ptable found: ver: 1 len: 3 DRAM: 512 MiB machid : 0x8010006 NAND: ONFI device found ID = 9590dcc2 Vendor = c2 Device = dc SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x400000 516 MiB In: serial Out: serial Err: serial machid: 8010006 flash_type: 0 Configurate GPIO setting Configurate TPM reset from low to high. Configurate BLE reset from low to high. Net: PHY ID = 0x4dd072, eth0 found AR8035 PHY MAC0 addr:7c:5a:1c:2:d0:b8 eth0 Creating 1 MTD partitions on "nand0": 0x000000000000-0x000020000000 : "mtd=0" UBI: attaching mtd2 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 126976 bytes UBI: smallest flash I/O unit: 2048 UBI: VID header offset: 2048 (aligned 2048) UBI: data offset: 4096 UBI: attached mtd2 to ubi0 UBI: MTD device name: "mtd=0" UBI: MTD device size: 512 MiB UBI: number of good PEBs: 4096 UBI: number of bad PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 3 UBI: available PEBs: 2696 UBI: total number of reserved PEBs: 1400 UBI: number of PEBs reserved for bad PEB handling: 40 UBI: max/mean erase counter: 12/4 SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB Hit any key to stop autoboot: 0 Read 0 bytes from volume image to 88000000 No size specified -> Using max size (67170304) Wrong Image Format for bootm command ERROR: can't get kernel image! Read 0 bytes from volume image_backup to 88000000 No size specified -> Using max size (126976) Wrong Image Format for bootm command ERROR: can't get kernel image! eth0 PHY0 Down Speed :10 Half duplex data abort pc : [<8733e7e0>] lr : [<8733e794>] sp : 871efc38 ip : 00000000 fp : 00000000 r10: 8735e14f r9 : 00000000 r8 : 871eff60 r7 : 88000000 r6 : 00000000 r5 : 871efc54 r4 : 88000000 r3 : fffffff8 r2 : 00000004 r1 : 00000000 r0 : 87ffffff Flags: NzCv IRQs off FIQs off Mode SVC_32 Resetting CPU ... resetting ... Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00108 S - IMAGE_VARIANT_STRING=DAABANAZA S - OEM_IMAGE_VERSION_STRING=CRM S - Boot Config, 0x00000021 S - Reset status Config, 0x00000010 S - Core 0 Frequency, 0 MHz B - 261 - PBL, Start B - 1339 - bootable_media_detect_entry, Start B - 1679 - bootable_media_detect_success, Start B - 1693 - elf_loader_entry, Start B - 5069 - auth_hash_seg_entry, Start B - 7213 - auth_hash_seg_exit, Start B - 578585 - elf_segs_hash_verify_entry, Start B - 694766 - PBL, End B - 694790 - SBL1, Start B - 785125 - pm_device_init, Start D - 7 - pm_device_init, Delta B - 786652 - boot_flash_init, Start D - 79868 - boot_flash_init, Delta B - 870663 - boot_config_data_table_init, Start D - 3839 - boot_config_data_table_init, Delta - (419 Bytes) B - 878140 - clock_init, Start D - 7556 - clock_init, Delta B - 889870 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:6 B - 893284 - sbl1_ddr_set_params, Start B - 898380 - cpr_init, Start D - 2 - cpr_init, Delta B - 902762 - Pre_DDR_clock_init, Start D - 4 - Pre_DDR_clock_init, Delta D - 13176 - sbl1_ddr_set_params, Delta B - 916076 - pm_driver_init, Start D - 3 - pm_driver_init, Delta B - 986808 - sbl1_wait_for_ddr_training, Start D - 27 - sbl1_wait_for_ddr_training, Delta B - 1002982 - Image Load, Start D - 138443 - QSEE Image Loaded, Delta - (269176 Bytes) B - 1141859 - Image Load, Start D - 1442 - SEC Image Loaded, Delta - (2048 Bytes) B - 1152162 - Image Load, Start D - 220190 - APPSBL Image Loaded, Delta - (450356 Bytes) B - 1372749 - QSEE Execution, Start D - 60 - QSEE Execution, Delta B - 1378969 - SBL1, End D - 686255 - SBL1, Delta S - Flash Throughput, 2006 KB/s (721999 Bytes, 359882 us) S - DDR Frequency, 672 MHz U-Boot 2012.07 (Dec 05 2017 - 16:05:06) smem ram ptable found: ver: 1 len: 3 DRAM: 512 MiB machid : 0x8010006 NAND: ONFI device found ID = 9590dcc2 Vendor = c2 Device = dc SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x400000 516 MiB In: serial Out: serial Err: serial machid: 8010006 flash_type: 0 Configurate GPIO setting Configurate TPM reset from low to high. Configurate BLE reset from low to high. Net: PHY ID = 0x4dd072, eth0 found AR8035 PHY MAC0 addr:7c:5a:1c:2:d0:b8 eth0 Creating 1 MTD partitions on "nand0": 0x000000000000-0x000020000000 : "mtd=0" UBI: attaching mtd2 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 126976 bytes UBI: smallest flash I/O unit: 2048 UBI: VID header offset: 2048 (aligned 2048) UBI: data offset: 4096 UBI: attached mtd2 to ubi0 UBI: MTD device name: "mtd=0" UBI: MTD device size: 512 MiB UBI: number of good PEBs: 4096 UBI: number of bad PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 3 UBI: available PEBs: 2696 UBI: total number of reserved PEBs: 1400 UBI: number of PEBs reserved for bad PEB handling: 40 UBI: max/mean erase counter: 12/4 SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB Hit any key to stop autoboot: 0 Read 0 bytes from volume image to 88000000 No size specified -> Using max size (67170304) Wrong Image Format for bootm command ERROR: can't get kernel image! Read 0 bytes from volume image_backup to 88000000 No size specified -> Using max size (126976) Wrong Image Format for bootm command ERROR: can't get kernel image! eth0 PHY0 Down Speed :10 Half duplex data abort pc : [<8733e7e0>] lr : [<8733e794>] sp : 871efc38 ip : 00000000 fp : 00000000 r10: 8735e14f r9 : 00000000 r8 : 871eff60 r7 : 88000000 r6 : 00000000 r5 : 871efc54 r4 : 88000000 r3 : fffffff8 r2 : 00000004 r1 : 00000000 r0 : 87ffffff Flags: NzCv IRQs off FIQs off Mode SVC_32 Resetting CPU ... resetting ... Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00108 S - IMAGE_VARIANT_STRING=DAABANAZA S - OEM_IMAGE_VERSION_STRING=CRM S - Boot Config, 0x00000021 S - Reset status Config, 0x00000010 S - Core 0 Frequency, 0 MHz B - 261 - PBL, Start B - 1339 - bootable_media_detect_entry, Start B - 1679 - bootable_media_detect_success, Start B - 1692 - elf_loader_entry, Start B - 5069 - auth_hash_seg_entry, Start B - 7213 - auth_hash_seg_exit, Start B - 578558 - elf_segs_hash_verify_entry, Start B - 694737 - PBL, End B - 694761 - SBL1, Start B - 785094 - pm_device_init, Start D - 7 - pm_device_init, Delta B - 786619 - boot_flash_init, Start D - 79850 - boot_flash_init, Delta B - 870616 - boot_config_data_table_init, Start D - 3838 - boot_config_data_table_init, Delta - (419 Bytes) B - 877824 - clock_init, Start D - 7564 - clock_init, Delta B - 889886 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:6 B - 893299 - sbl1_ddr_set_params, Start B - 898395 - cpr_init, Start D - 2 - cpr_init, Delta B - 902776 - Pre_DDR_clock_init, Start D - 5 - Pre_DDR_clock_init, Delta D - 13173 - sbl1_ddr_set_params, Delta B - 916088 - pm_driver_init, Start D - 3 - pm_driver_init, Delta B - 986655 - sbl1_wait_for_ddr_training, Start D - 27 - sbl1_wait_for_ddr_training, Delta B - 1002854 - Image Load, Start D - 138331 - QSEE Image Loaded, Delta - (269176 Bytes) B - 1141617 - Image Load, Start D - 1434 - SEC Image Loaded, Delta - (2048 Bytes) B - 1151905 - Image Load, Start D - 219995 - APPSBL Image Loaded, Delta - (450356 Bytes) B - 1372297 - QSEE Execution, Start D - 60 - QSEE Execution, Delta B - 1378515 - SBL1, End D - 685832 - SBL1, Delta S - Flash Throughput, 2007 KB/s (721999 Bytes, 359567 us) S - DDR Frequency, 672 MHz U-Boot 2012.07 (Dec 05 2017 - 16:05:06) smem ram ptable found: ver: 1 len: 3 DRAM: 512 MiB machid : 0x8010006 NAND: ONFI device found ID = 9590dcc2 Vendor = c2 Device = dc SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x400000 516 MiB In: serial Out: serial Err: serial machid: 8010006 flash_type: 0 Configurate GPIO setting Configurate TPM reset from low to high. Configurate BLE reset from low to high. Net: PHY ID = 0x4dd072, eth0 found AR8035 PHY MAC0 addr:7c:5a:1c:2:d0:b8 eth0 Creating 1 MTD partitions on "nand0": 0x000000000000-0x000020000000 : "mtd=0" UBI: attaching mtd2 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 126976 bytes UBI: smallest flash I/O unit: 2048 UBI: VID header offset: 2048 (aligned 2048) UBI: data offset: 4096 UBI: attached mtd2 to ubi0 UBI: MTD device name: "mtd=0" UBI: MTD device size: 512 MiB UBI: number of good PEBs: 4096 UBI: number of bad PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 3 UBI: available PEBs: 2696 UBI: total number of reserved PEBs: 1400 UBI: number of PEBs reserved for bad PEB handling: 40 UBI: max/mean erase counter: 12/4 SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB Hit any key to stop autoboot: 0 Read 0 bytes from volume image to 88000000 No size specified -> Using max size (67170304) Wrong Image Format for bootm command ERROR: can't get kernel image! Read 0 bytes from volume image_backup to 88000000 No size specified -> Using max size (126976) Wrong Image Format for bootm command ERROR: can't get kernel image! eth0 PHY0 Down Speed :1000 Full duplex data abort pc : [<8733e7e0>] lr : [<8733e794>] sp : 871efc38 ip : 00000000 fp : 00000000 r10: 8735e14f r9 : 00000000 r8 : 871eff60 r7 : 88000000 r6 : 00000000 r5 : 871efc54 r4 : 88000000 r3 : fffffff8 r2 : 00000004 r1 : 00000000 r0 : 87ffffff Flags: NzCv IRQs off FIQs off Mode SVC_32 Resetting CPU ... resetting ... Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00108 S - IMAGE_VARIANT_STRING=DAABANAZA S - OEM_IMAGE_VERSION_STRING=CRM S - Boot Config, 0x00000021 S - Reset status Config, 0x00000010 S - Core 0 Frequency, 0 MHz B - 261 - PBL, Start B - 1339 - bootable_media_detect_entry, Start B - 1679 - bootable_media_detect_success, Start B - 1693 - elf_loader_entry, Start B - 5069 - auth_hash_seg_entry, Start B - 7213 - auth_hash_seg_exit, Start B - 578554 - elf_segs_hash_verify_entry, Start B - 694737 - PBL, End B - 694761 - SBL1, Start B - 785094 - pm_device_init, Start D - 7 - pm_device_init, Delta B - 786620 - boot_flash_init, Start D - 79859 - boot_flash_init, Delta B - 870624 - boot_config_data_table_init, Start D - 3839 - boot_config_data_table_init, Delta - (419 Bytes) B - 878103 - clock_init, Start D - 7563 - clock_init, Delta B - 889841 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:6 B - 893254 - sbl1_ddr_set_params, Start B - 898350 - cpr_init, Start D - 2 - cpr_init, Delta B - 902732 - Pre_DDR_clock_init, Start D - 5 - Pre_DDR_clock_init, Delta D - 13174 - sbl1_ddr_set_params, Delta B - 916044 - pm_driver_init, Start D - 3 - pm_driver_init, Delta B - 986677 - sbl1_wait_for_ddr_training, Start D - 27 - sbl1_wait_for_ddr_training, Delta B - 1002924 - Image Load, Start D - 138337 - QSEE Image Loaded, Delta - (269176 Bytes) B - 1141694 - Image Load, Start D - 1440 - SEC Image Loaded, Delta - (2048 Bytes) B - 1151990 - Image Load, Start D - 219979 - APPSBL Image Loaded, Delta - (450356 Bytes) B - 1372366 - QSEE Execution, Start D - 60 - QSEE Execution, Delta B - 1378584 - SBL1, End D - 685902 - SBL1, Delta S - Flash Throughput, 2008 KB/s (721999 Bytes, 359560 us) S - DDR Frequency, 672 MHz U-Boot 2012.07 (Dec 05 2017 - 16:05:06) smem ram ptable found: ver: 1 len: 3 DRAM: 512 MiB machid : 0x8010006 NAND: ONFI device found ID = 9590dcc2 Vendor = c2 Device = dc SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x400000 516 MiB In: serial Out: serial Err: serial machid: 8010006 flash_type: 0 Configurate GPIO setting Configurate TPM reset from low to high. Configurate BLE reset from low to high. Net: PHY ID = 0x4dd072, eth0 found AR8035 PHY MAC0 addr:7c:5a:1c:2:d0:b8 eth0 Creating 1 MTD partitions on "nand0": 0x000000000000-0x000020000000 : "mtd=0" UBI: attaching mtd2 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 126976 bytes UBI: smallest flash I/O unit: 2048 UBI: VID header offset: 2048 (aligned 2048) UBI: data offset: 4096 UBI: attached mtd2 to ubi0 UBI: MTD device name: "mtd=0" UBI: MTD device size: 512 MiB UBI: number of good PEBs: 4096 UBI: number of bad PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 3 UBI: available PEBs: 2696 UBI: total number of reserved PEBs: 1400 UBI: number of PEBs reserved for bad PEB handling: 40 UBI: max/mean erase counter: 12/4 SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB Hit any key to stop autoboot: 0 Read 0 bytes from volume image to 88000000 No size specified -> Using max size (67170304) Wrong Image Format for bootm command ERROR: can't get kernel image! Read 0 bytes from volume image_backup to 88000000 No size specified -> Using max size (126976) Wrong Image Format for bootm command ERROR: can't get kernel image! eth0 PHY0 Down Speed :10 Half duplex data abort pc : [<8733e7e0>] lr : [<8733e794>] sp : 871efc38 ip : 00000000 fp : 00000000 r10: 8735e14f r9 : 00000000 r8 : 871eff60 r7 : 88000000 r6 : 00000000 r5 : 871efc54 r4 : 88000000 r3 : fffffff8 r2 : 00000004 r1 : 00000000 r0 : 87ffffff Flags: NzCv IRQs off FIQs off Mode SVC_32 Resetting CPU ... resetting ... Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00108 S - IMAGE_VARIANT_STRING=DAABANAZA S - OEM_IMAGE_VERSION_STRING=CRM S - Boot Config, 0x00000021 S - Reset status Config, 0x00000010 S - Core 0 Frequency, 0 MHz B - 261 - PBL, Start B - 1339 - bootable_media_detect_entry, Start B - 1678 - bootable_media_detect_success, Start B - 1692 - elf_loader_entry, Start B - 5068 - auth_hash_seg_entry, Start B - 7212 - auth_hash_seg_exit, Start B - 578553 - elf_segs_hash_verify_entry, Start B - 694734 - PBL, End B - 694758 - SBL1, Start B - 785092 - pm_device_init, Start D - 7 - pm_device_init, Delta B - 786618 - boot_flash_init, Start D - 79860 - boot_flash_init, Delta B - 870624 - boot_config_data_table_init, Start D - 3839 - boot_config_data_table_init, Delta - (419 Bytes) B - 877840 - clock_init, Start D - 7564 - clock_init, Delta B - 889902 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:6 B - 893315 - sbl1_ddr_set_params, Start B - 898412 - cpr_init, Start D - 2 - cpr_init, Delta B - 902794 - Pre_DDR_clock_init, Start D - 4 - Pre_DDR_clock_init, Delta D - 13175 - sbl1_ddr_set_params, Delta B - 916105 - pm_driver_init, Start D - 3 - pm_driver_init, Delta B - 986672 - sbl1_wait_for_ddr_training, Start D - 27 - sbl1_wait_for_ddr_training, Delta B - 1002916 - Image Load, Start D - 138325 - QSEE Image Loaded, Delta - (269176 Bytes) B - 1141675 - Image Load, Start D - 1435 - SEC Image Loaded, Delta - (2048 Bytes) B - 1151967 - Image Load, Start D - 219985 - APPSBL Image Loaded, Delta - (450356 Bytes) B - 1372348 - QSEE Execution, Start D - 60 - QSEE Execution, Delta B - 1378565 - SBL1, End D - 685886 - SBL1, Delta S - Flash Throughput, 2008 KB/s (721999 Bytes, 359556 us) S - DDR Frequency, 672 MHz U-Boot 2012.07 (Dec 05 2017 - 16:05:06) smem ram ptable found: ver: 1 len: 3 DRAM: 512 MiB machid : 0x8010006 NAND: ONFI device found ID = 9590dcc2 Vendor = c2 Device = dc SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x400000 516 MiB In: serial Out: serial Err: serial machid: 8010006 flash_type: 0 Configurate GPIO setting Configurate TPM reset from low to high. Configurate BLE reset from low to high. Net: PHY ID = 0x4dd072, eth0 found AR8035 PHY MAC0 addr:7c:5a:1c:2:d0:b8 eth0 Creating 1 MTD partitions on "nand0": 0x000000000000-0x000020000000 : "mtd=0" UBI: attaching mtd2 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 126976 bytes UBI: smallest flash I/O unit: 2048 UBI: VID header offset: 2048 (aligned 2048) UBI: data offset: 4096 U
Can any Body Helps ?
This thread was automatically locked due to age.
