This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

APX320 Boot Loop, can't get kernel image!

Hello,

I Have an APX320. It won´t work.

It do an Boot Loop

Error Message in Log:

Wrong Image Format for bootm command
ERROR: can't get kernel image!
Read 0 bytes from volume image_backup to 88000000
No size specified -> Using max size (126976)
Wrong Image Format for bootm command
ERROR: can't get kernel image!
eth0 PHY0 Down Speed :10 Half duplex
data abort

UBI: attached mtd2 to ubi0
UBI: MTD device name:            "mtd=0"
UBI: MTD device size:            512 MiB
UBI: number of good PEBs:        4096
UBI: number of bad PEBs:         0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     3
UBI: available PEBs:             2696
UBI: total number of reserved PEBs: 1400
UBI: number of PEBs reserved for bad PEB handling: 40
UBI: max/mean erase counter: 12/4
SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB
Hit any key to stop autoboot:  0
Read 0 bytes from volume image to 88000000
No size specified -> Using max size (67170304)
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Read 0 bytes from volume image_backup to 88000000
No size specified -> Using max size (126976)
Wrong Image Format for bootm command
ERROR: can't get kernel image!
eth0 PHY0 Down Speed :10 Half duplex
data abort
pc : [<8733e7e0>]          lr : [<8733e794>]
sp : 871efc38  ip : 00000000     fp : 00000000
r10: 8735e14f  r9 : 00000000     r8 : 871eff60
r7 : 88000000  r6 : 00000000     r5 : 871efc54  r4 : 88000000
r3 : fffffff8  r2 : 00000004     r1 : 00000000  r0 : 87ffffff
Flags: NzCv  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...

resetting ...

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00108
S - IMAGE_VARIANT_STRING=DAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000021
S - Reset status Config, 0x00000010
S - Core 0 Frequency, 0 MHz
B -       261 - PBL, Start
B -      1339 - bootable_media_detect_entry, Start
B -      1679 - bootable_media_detect_success, Start
B -      1692 - elf_loader_entry, Start
B -      5069 - auth_hash_seg_entry, Start
B -      7213 - auth_hash_seg_exit, Start
B -    578544 - elf_segs_hash_verify_entry, Start
B -    694724 - PBL, End
B -    694748 - SBL1, Start
B -    785082 - pm_device_init, Start
D -         7 - pm_device_init, Delta
B -    786608 - boot_flash_init, Start
D -     79857 - boot_flash_init, Delta
B -    870610 - boot_config_data_table_init, Start
D -      3839 - boot_config_data_table_init, Delta - (419 Bytes)
B -    878086 - clock_init, Start
D -      7566 - clock_init, Delta
B -    889826 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:6
B -    893239 - sbl1_ddr_set_params, Start
B -    898335 - cpr_init, Start
D -         2 - cpr_init, Delta
B -    902716 - Pre_DDR_clock_init, Start
D -         5 - Pre_DDR_clock_init, Delta
D -     13174 - sbl1_ddr_set_params, Delta
B -    916028 - pm_driver_init, Start
D -         3 - pm_driver_init, Delta
B -    986580 - sbl1_wait_for_ddr_training, Start
D -        27 - sbl1_wait_for_ddr_training, Delta
B -   1002777 - Image Load, Start
D -    138335 - QSEE Image Loaded, Delta - (269176 Bytes)
B -   1141542 - Image Load, Start
D -      1435 - SEC Image Loaded, Delta - (2048 Bytes)
B -   1151835 - Image Load, Start
D -    220012 - APPSBL Image Loaded, Delta - (450356 Bytes)
B -   1372246 - QSEE Execution, Start
D -        60 - QSEE Execution, Delta
B -   1378468 - SBL1, End
D -    685798 - SBL1, Delta
S - Flash Throughput, 2007 KB/s  (721999 Bytes,  359585 us)
S - DDR Frequency, 672 MHz


U-Boot 2012.07 (Dec 05 2017 - 16:05:06)

smem ram ptable found: ver: 1 len: 3
DRAM:  512 MiB
machid : 0x8010006
NAND:  ONFI device found
ID = 9590dcc2
Vendor = c2
Device = dc
SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB
ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x400000
516 MiB
In:    serial
Out:   serial
Err:   serial
machid: 8010006
flash_type: 0
Configurate GPIO setting
Configurate TPM reset from low to high.
Configurate BLE reset from low to high.
Net:
PHY ID = 0x4dd072, eth0 found AR8035 PHY
MAC0 addr:7c:5a:1c:2:d0:b8
eth0
Creating 1 MTD partitions on "nand0":
0x000000000000-0x000020000000 : "mtd=0"
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
UBI: attached mtd2 to ubi0
UBI: MTD device name:            "mtd=0"
UBI: MTD device size:            512 MiB
UBI: number of good PEBs:        4096
UBI: number of bad PEBs:         0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     3
UBI: available PEBs:             2696
UBI: total number of reserved PEBs: 1400
UBI: number of PEBs reserved for bad PEB handling: 40
UBI: max/mean erase counter: 12/4
SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB
Hit any key to stop autoboot:  0
Read 0 bytes from volume image to 88000000
No size specified -> Using max size (67170304)
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Read 0 bytes from volume image_backup to 88000000
No size specified -> Using max size (126976)
Wrong Image Format for bootm command
ERROR: can't get kernel image!
eth0 PHY0 Down Speed :10 Half duplex
data abort
pc : [<8733e7e0>]          lr : [<8733e794>]
sp : 871efc38  ip : 00000000     fp : 00000000
r10: 8735e14f  r9 : 00000000     r8 : 871eff60
r7 : 88000000  r6 : 00000000     r5 : 871efc54  r4 : 88000000
r3 : fffffff8  r2 : 00000004     r1 : 00000000  r0 : 87ffffff
Flags: NzCv  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...

resetting ...

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00108
S - IMAGE_VARIANT_STRING=DAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000021
S - Reset status Config, 0x00000010
S - Core 0 Frequency, 0 MHz
B -       261 - PBL, Start
B -      1339 - bootable_media_detect_entry, Start
B -      1679 - bootable_media_detect_success, Start
B -      1693 - elf_loader_entry, Start
B -      5069 - auth_hash_seg_entry, Start
B -      7213 - auth_hash_seg_exit, Start
B -    578571 - elf_segs_hash_verify_entry, Start
B -    694773 - PBL, End
B -    694797 - SBL1, Start
B -    785131 - pm_device_init, Start
D -         7 - pm_device_init, Delta
B -    786658 - boot_flash_init, Start
D -     79866 - boot_flash_init, Delta
B -    870669 - boot_config_data_table_init, Start
D -      3839 - boot_config_data_table_init, Delta - (419 Bytes)
B -    877884 - clock_init, Start
D -      7586 - clock_init, Delta
B -    889969 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:6
B -    893383 - sbl1_ddr_set_params, Start
B -    898480 - cpr_init, Start
D -         2 - cpr_init, Delta
B -    902862 - Pre_DDR_clock_init, Start
D -         4 - Pre_DDR_clock_init, Delta
D -     13175 - sbl1_ddr_set_params, Delta
B -    916175 - pm_driver_init, Start
D -         3 - pm_driver_init, Delta
B -    986989 - sbl1_wait_for_ddr_training, Start
D -        27 - sbl1_wait_for_ddr_training, Delta
B -   1003161 - Image Load, Start
D -    138455 - QSEE Image Loaded, Delta - (269176 Bytes)
B -   1142048 - Image Load, Start
D -      1439 - SEC Image Loaded, Delta - (2048 Bytes)
B -   1152348 - Image Load, Start
D -    220180 - APPSBL Image Loaded, Delta - (450356 Bytes)
B -   1372925 - QSEE Execution, Start
D -        60 - QSEE Execution, Delta
B -   1379146 - SBL1, End
D -    686428 - SBL1, Delta
S - Flash Throughput, 2006 KB/s  (721999 Bytes,  359879 us)
S - DDR Frequency, 672 MHz


U-Boot 2012.07 (Dec 05 2017 - 16:05:06)

smem ram ptable found: ver: 1 len: 3
DRAM:  512 MiB
machid : 0x8010006
NAND:  ONFI device found
ID = 9590dcc2
Vendor = c2
Device = dc
SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB
ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x400000
516 MiB
In:    serial
Out:   serial
Err:   serial
machid: 8010006
flash_type: 0
Configurate GPIO setting
Configurate TPM reset from low to high.
Configurate BLE reset from low to high.
Net:
PHY ID = 0x4dd072, eth0 found AR8035 PHY
MAC0 addr:7c:5a:1c:2:d0:b8
eth0
Creating 1 MTD partitions on "nand0":
0x000000000000-0x000020000000 : "mtd=0"
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
UBI: attached mtd2 to ubi0
UBI: MTD device name:            "mtd=0"
UBI: MTD device size:            512 MiB
UBI: number of good PEBs:        4096
UBI: number of bad PEBs:         0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     3
UBI: available PEBs:             2696
UBI: total number of reserved PEBs: 1400
UBI: number of PEBs reserved for bad PEB handling: 40
UBI: max/mean erase counter: 12/4
SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB
Hit any key to stop autoboot:  0
Read 0 bytes from volume image to 88000000
No size specified -> Using max size (67170304)
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Read 0 bytes from volume image_backup to 88000000
No size specified -> Using max size (126976)
Wrong Image Format for bootm command
ERROR: can't get kernel image!
eth0 PHY0 Down Speed :10 Half duplex
data abort
pc : [<8733e7e0>]          lr : [<8733e794>]
sp : 871efc38  ip : 00000000     fp : 00000000
r10: 8735e14f  r9 : 00000000     r8 : 871eff60
r7 : 88000000  r6 : 00000000     r5 : 871efc54  r4 : 88000000
r3 : fffffff8  r2 : 00000004     r1 : 00000000  r0 : 87ffffff
Flags: NzCv  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...

resetting ...

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00108
S - IMAGE_VARIANT_STRING=DAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000021
S - Reset status Config, 0x00000010
S - Core 0 Frequency, 0 MHz
B -       261 - PBL, Start
B -      1339 - bootable_media_detect_entry, Start
B -      1679 - bootable_media_detect_success, Start
B -      1693 - elf_loader_entry, Start
B -      5069 - auth_hash_seg_entry, Start
B -      7213 - auth_hash_seg_exit, Start
B -    578585 - elf_segs_hash_verify_entry, Start
B -    694766 - PBL, End
B -    694790 - SBL1, Start
B -    785125 - pm_device_init, Start
D -         7 - pm_device_init, Delta
B -    786652 - boot_flash_init, Start
D -     79868 - boot_flash_init, Delta
B -    870663 - boot_config_data_table_init, Start
D -      3839 - boot_config_data_table_init, Delta - (419 Bytes)
B -    878140 - clock_init, Start
D -      7556 - clock_init, Delta
B -    889870 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:6
B -    893284 - sbl1_ddr_set_params, Start
B -    898380 - cpr_init, Start
D -         2 - cpr_init, Delta
B -    902762 - Pre_DDR_clock_init, Start
D -         4 - Pre_DDR_clock_init, Delta
D -     13176 - sbl1_ddr_set_params, Delta
B -    916076 - pm_driver_init, Start
D -         3 - pm_driver_init, Delta
B -    986808 - sbl1_wait_for_ddr_training, Start
D -        27 - sbl1_wait_for_ddr_training, Delta
B -   1002982 - Image Load, Start
D -    138443 - QSEE Image Loaded, Delta - (269176 Bytes)
B -   1141859 - Image Load, Start
D -      1442 - SEC Image Loaded, Delta - (2048 Bytes)
B -   1152162 - Image Load, Start
D -    220190 - APPSBL Image Loaded, Delta - (450356 Bytes)
B -   1372749 - QSEE Execution, Start
D -        60 - QSEE Execution, Delta
B -   1378969 - SBL1, End
D -    686255 - SBL1, Delta
S - Flash Throughput, 2006 KB/s  (721999 Bytes,  359882 us)
S - DDR Frequency, 672 MHz


U-Boot 2012.07 (Dec 05 2017 - 16:05:06)

smem ram ptable found: ver: 1 len: 3
DRAM:  512 MiB
machid : 0x8010006
NAND:  ONFI device found
ID = 9590dcc2
Vendor = c2
Device = dc
SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB
ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x400000
516 MiB
In:    serial
Out:   serial
Err:   serial
machid: 8010006
flash_type: 0
Configurate GPIO setting
Configurate TPM reset from low to high.
Configurate BLE reset from low to high.
Net:
PHY ID = 0x4dd072, eth0 found AR8035 PHY
MAC0 addr:7c:5a:1c:2:d0:b8
eth0
Creating 1 MTD partitions on "nand0":
0x000000000000-0x000020000000 : "mtd=0"
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
UBI: attached mtd2 to ubi0
UBI: MTD device name:            "mtd=0"
UBI: MTD device size:            512 MiB
UBI: number of good PEBs:        4096
UBI: number of bad PEBs:         0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     3
UBI: available PEBs:             2696
UBI: total number of reserved PEBs: 1400
UBI: number of PEBs reserved for bad PEB handling: 40
UBI: max/mean erase counter: 12/4
SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB
Hit any key to stop autoboot:  0
Read 0 bytes from volume image to 88000000
No size specified -> Using max size (67170304)
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Read 0 bytes from volume image_backup to 88000000
No size specified -> Using max size (126976)
Wrong Image Format for bootm command
ERROR: can't get kernel image!
eth0 PHY0 Down Speed :10 Half duplex
data abort
pc : [<8733e7e0>]          lr : [<8733e794>]
sp : 871efc38  ip : 00000000     fp : 00000000
r10: 8735e14f  r9 : 00000000     r8 : 871eff60
r7 : 88000000  r6 : 00000000     r5 : 871efc54  r4 : 88000000
r3 : fffffff8  r2 : 00000004     r1 : 00000000  r0 : 87ffffff
Flags: NzCv  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...

resetting ...

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00108
S - IMAGE_VARIANT_STRING=DAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000021
S - Reset status Config, 0x00000010
S - Core 0 Frequency, 0 MHz
B -       261 - PBL, Start
B -      1339 - bootable_media_detect_entry, Start
B -      1679 - bootable_media_detect_success, Start
B -      1692 - elf_loader_entry, Start
B -      5069 - auth_hash_seg_entry, Start
B -      7213 - auth_hash_seg_exit, Start
B -    578558 - elf_segs_hash_verify_entry, Start
B -    694737 - PBL, End
B -    694761 - SBL1, Start
B -    785094 - pm_device_init, Start
D -         7 - pm_device_init, Delta
B -    786619 - boot_flash_init, Start
D -     79850 - boot_flash_init, Delta
B -    870616 - boot_config_data_table_init, Start
D -      3838 - boot_config_data_table_init, Delta - (419 Bytes)
B -    877824 - clock_init, Start
D -      7564 - clock_init, Delta
B -    889886 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:6
B -    893299 - sbl1_ddr_set_params, Start
B -    898395 - cpr_init, Start
D -         2 - cpr_init, Delta
B -    902776 - Pre_DDR_clock_init, Start
D -         5 - Pre_DDR_clock_init, Delta
D -     13173 - sbl1_ddr_set_params, Delta
B -    916088 - pm_driver_init, Start
D -         3 - pm_driver_init, Delta
B -    986655 - sbl1_wait_for_ddr_training, Start
D -        27 - sbl1_wait_for_ddr_training, Delta
B -   1002854 - Image Load, Start
D -    138331 - QSEE Image Loaded, Delta - (269176 Bytes)
B -   1141617 - Image Load, Start
D -      1434 - SEC Image Loaded, Delta - (2048 Bytes)
B -   1151905 - Image Load, Start
D -    219995 - APPSBL Image Loaded, Delta - (450356 Bytes)
B -   1372297 - QSEE Execution, Start
D -        60 - QSEE Execution, Delta
B -   1378515 - SBL1, End
D -    685832 - SBL1, Delta
S - Flash Throughput, 2007 KB/s  (721999 Bytes,  359567 us)
S - DDR Frequency, 672 MHz


U-Boot 2012.07 (Dec 05 2017 - 16:05:06)

smem ram ptable found: ver: 1 len: 3
DRAM:  512 MiB
machid : 0x8010006
NAND:  ONFI device found
ID = 9590dcc2
Vendor = c2
Device = dc
SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB
ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x400000
516 MiB
In:    serial
Out:   serial
Err:   serial
machid: 8010006
flash_type: 0
Configurate GPIO setting
Configurate TPM reset from low to high.
Configurate BLE reset from low to high.
Net:
PHY ID = 0x4dd072, eth0 found AR8035 PHY
MAC0 addr:7c:5a:1c:2:d0:b8
eth0
Creating 1 MTD partitions on "nand0":
0x000000000000-0x000020000000 : "mtd=0"
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
UBI: attached mtd2 to ubi0
UBI: MTD device name:            "mtd=0"
UBI: MTD device size:            512 MiB
UBI: number of good PEBs:        4096
UBI: number of bad PEBs:         0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     3
UBI: available PEBs:             2696
UBI: total number of reserved PEBs: 1400
UBI: number of PEBs reserved for bad PEB handling: 40
UBI: max/mean erase counter: 12/4
SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB
Hit any key to stop autoboot:  0
Read 0 bytes from volume image to 88000000
No size specified -> Using max size (67170304)
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Read 0 bytes from volume image_backup to 88000000
No size specified -> Using max size (126976)
Wrong Image Format for bootm command
ERROR: can't get kernel image!
eth0 PHY0 Down Speed :1000 Full duplex
data abort
pc : [<8733e7e0>]          lr : [<8733e794>]
sp : 871efc38  ip : 00000000     fp : 00000000
r10: 8735e14f  r9 : 00000000     r8 : 871eff60
r7 : 88000000  r6 : 00000000     r5 : 871efc54  r4 : 88000000
r3 : fffffff8  r2 : 00000004     r1 : 00000000  r0 : 87ffffff
Flags: NzCv  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...

resetting ...

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00108
S - IMAGE_VARIANT_STRING=DAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000021
S - Reset status Config, 0x00000010
S - Core 0 Frequency, 0 MHz
B -       261 - PBL, Start
B -      1339 - bootable_media_detect_entry, Start
B -      1679 - bootable_media_detect_success, Start
B -      1693 - elf_loader_entry, Start
B -      5069 - auth_hash_seg_entry, Start
B -      7213 - auth_hash_seg_exit, Start
B -    578554 - elf_segs_hash_verify_entry, Start
B -    694737 - PBL, End
B -    694761 - SBL1, Start
B -    785094 - pm_device_init, Start
D -         7 - pm_device_init, Delta
B -    786620 - boot_flash_init, Start
D -     79859 - boot_flash_init, Delta
B -    870624 - boot_config_data_table_init, Start
D -      3839 - boot_config_data_table_init, Delta - (419 Bytes)
B -    878103 - clock_init, Start
D -      7563 - clock_init, Delta
B -    889841 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:6
B -    893254 - sbl1_ddr_set_params, Start
B -    898350 - cpr_init, Start
D -         2 - cpr_init, Delta
B -    902732 - Pre_DDR_clock_init, Start
D -         5 - Pre_DDR_clock_init, Delta
D -     13174 - sbl1_ddr_set_params, Delta
B -    916044 - pm_driver_init, Start
D -         3 - pm_driver_init, Delta
B -    986677 - sbl1_wait_for_ddr_training, Start
D -        27 - sbl1_wait_for_ddr_training, Delta
B -   1002924 - Image Load, Start
D -    138337 - QSEE Image Loaded, Delta - (269176 Bytes)
B -   1141694 - Image Load, Start
D -      1440 - SEC Image Loaded, Delta - (2048 Bytes)
B -   1151990 - Image Load, Start
D -    219979 - APPSBL Image Loaded, Delta - (450356 Bytes)
B -   1372366 - QSEE Execution, Start
D -        60 - QSEE Execution, Delta
B -   1378584 - SBL1, End
D -    685902 - SBL1, Delta
S - Flash Throughput, 2008 KB/s  (721999 Bytes,  359560 us)
S - DDR Frequency, 672 MHz


U-Boot 2012.07 (Dec 05 2017 - 16:05:06)

smem ram ptable found: ver: 1 len: 3
DRAM:  512 MiB
machid : 0x8010006
NAND:  ONFI device found
ID = 9590dcc2
Vendor = c2
Device = dc
SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB
ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x400000
516 MiB
In:    serial
Out:   serial
Err:   serial
machid: 8010006
flash_type: 0
Configurate GPIO setting
Configurate TPM reset from low to high.
Configurate BLE reset from low to high.
Net:
PHY ID = 0x4dd072, eth0 found AR8035 PHY
MAC0 addr:7c:5a:1c:2:d0:b8
eth0
Creating 1 MTD partitions on "nand0":
0x000000000000-0x000020000000 : "mtd=0"
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
UBI: attached mtd2 to ubi0
UBI: MTD device name:            "mtd=0"
UBI: MTD device size:            512 MiB
UBI: number of good PEBs:        4096
UBI: number of bad PEBs:         0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     3
UBI: available PEBs:             2696
UBI: total number of reserved PEBs: 1400
UBI: number of PEBs reserved for bad PEB handling: 40
UBI: max/mean erase counter: 12/4
SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB
Hit any key to stop autoboot:  0
Read 0 bytes from volume image to 88000000
No size specified -> Using max size (67170304)
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Read 0 bytes from volume image_backup to 88000000
No size specified -> Using max size (126976)
Wrong Image Format for bootm command
ERROR: can't get kernel image!
eth0 PHY0 Down Speed :10 Half duplex
data abort
pc : [<8733e7e0>]          lr : [<8733e794>]
sp : 871efc38  ip : 00000000     fp : 00000000
r10: 8735e14f  r9 : 00000000     r8 : 871eff60
r7 : 88000000  r6 : 00000000     r5 : 871efc54  r4 : 88000000
r3 : fffffff8  r2 : 00000004     r1 : 00000000  r0 : 87ffffff
Flags: NzCv  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...

resetting ...

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00108
S - IMAGE_VARIANT_STRING=DAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000021
S - Reset status Config, 0x00000010
S - Core 0 Frequency, 0 MHz
B -       261 - PBL, Start
B -      1339 - bootable_media_detect_entry, Start
B -      1678 - bootable_media_detect_success, Start
B -      1692 - elf_loader_entry, Start
B -      5068 - auth_hash_seg_entry, Start
B -      7212 - auth_hash_seg_exit, Start
B -    578553 - elf_segs_hash_verify_entry, Start
B -    694734 - PBL, End
B -    694758 - SBL1, Start
B -    785092 - pm_device_init, Start
D -         7 - pm_device_init, Delta
B -    786618 - boot_flash_init, Start
D -     79860 - boot_flash_init, Delta
B -    870624 - boot_config_data_table_init, Start
D -      3839 - boot_config_data_table_init, Delta - (419 Bytes)
B -    877840 - clock_init, Start
D -      7564 - clock_init, Delta
B -    889902 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:6
B -    893315 - sbl1_ddr_set_params, Start
B -    898412 - cpr_init, Start
D -         2 - cpr_init, Delta
B -    902794 - Pre_DDR_clock_init, Start
D -         4 - Pre_DDR_clock_init, Delta
D -     13175 - sbl1_ddr_set_params, Delta
B -    916105 - pm_driver_init, Start
D -         3 - pm_driver_init, Delta
B -    986672 - sbl1_wait_for_ddr_training, Start
D -        27 - sbl1_wait_for_ddr_training, Delta
B -   1002916 - Image Load, Start
D -    138325 - QSEE Image Loaded, Delta - (269176 Bytes)
B -   1141675 - Image Load, Start
D -      1435 - SEC Image Loaded, Delta - (2048 Bytes)
B -   1151967 - Image Load, Start
D -    219985 - APPSBL Image Loaded, Delta - (450356 Bytes)
B -   1372348 - QSEE Execution, Start
D -        60 - QSEE Execution, Delta
B -   1378565 - SBL1, End
D -    685886 - SBL1, Delta
S - Flash Throughput, 2008 KB/s  (721999 Bytes,  359556 us)
S - DDR Frequency, 672 MHz


U-Boot 2012.07 (Dec 05 2017 - 16:05:06)

smem ram ptable found: ver: 1 len: 3
DRAM:  512 MiB
machid : 0x8010006
NAND:  ONFI device found
ID = 9590dcc2
Vendor = c2
Device = dc
SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB
ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x400000
516 MiB
In:    serial
Out:   serial
Err:   serial
machid: 8010006
flash_type: 0
Configurate GPIO setting
Configurate TPM reset from low to high.
Configurate BLE reset from low to high.
Net:
PHY ID = 0x4dd072, eth0 found AR8035 PHY
MAC0 addr:7c:5a:1c:2:d0:b8
eth0
Creating 1 MTD partitions on "nand0":
0x000000000000-0x000020000000 : "mtd=0"
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
U

Can any Body Helps ?



This thread was automatically locked due to age.