Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 4 replies
  • Subscribers 13 subscribers
  • Views 4911 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP6 420E constant green LED is offline - normal operation?

LHerzog

while testing with the AP6 I see one device is showing offline for an hour in central. Checking the device it has a constant green LED and is not rebooting or whatever.

According to the documentation a solid green LED means normal operation.

So, what is it?  Being offline doesn't seem to be the new "normal".



This thread was automatically locked due to age.
Parents
  • +1

    Essentially the AP6 can work without Link to Central. Which means the local UI is fully available and the LED indicates not the Link to Central, instead the availablity of the AP6 itself. 

    Compared to APX, which made the APX unavailable without Central / Firewall, the AP6 is perfectly fine without Central, as the settings from Central gets pushed to the AP6. 

    __________________________________________________________________________________________________________________

Reply
  • +1

    Essentially the AP6 can work without Link to Central. Which means the local UI is fully available and the LED indicates not the Link to Central, instead the availablity of the AP6 itself. 

    Compared to APX, which made the APX unavailable without Central / Firewall, the AP6 is perfectly fine without Central, as the settings from Central gets pushed to the AP6. 

    __________________________________________________________________________________________________________________

Children
  • 0 in reply to LuCar Toni

    Thanks, I understand it can work with cached config but will not indicate a loss of active management communication in any visible way.

  • +1 in reply to LHerzog

    Actually: It is not cached config. AP6 is standalone. But accepts "call to actions" from central. Which means: If Central is not reachable, the AP6 does not care until it is once reachable. 
    It was a decision to change the LEDs and doing a RED/Orange LED for "not reachable" was not the right call as the AP6 still is fully functional. 

    __________________________________________________________________________________________________________________

Unfiltered HTML