This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

APX320 Login and Passwort or BootLoop

Hello,

After my APX was bricked, I have manually Installed then Firmware 11.0.020-1

https://community.sophos.com/sophoswireless/f/discussions/141850/wrong-firmware-installed-apx320

After that, the APX "come up" and I can see it in Wireless Accesspoint on my XG. After I had add the APX to Accesspoints, the APX was in an Boot Loop.

After get IP over DHCP

I see this Message on the Console

Ethernet link state changed to: up, Speed: 100, Duplex: full
Ethernet link state changed to: down

Then APX reboot ...

I want  to Install the new Firmware Version, but the Console need an Login and an Passwort ?

Has anyone this ?

Here are the Full Console

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00108
S - IMAGE_VARIANT_STRING=DAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000021
S - Reset status Config, 0x00000000
S - Core 0 Frequency, 0 MHz
B -       261 - PBL, Start
B -      1339 - bootable_media_detect_entry, Start
B -      1679 - bootable_media_detect_success, Start
B -      1693 - elf_loader_entry, Start
B -      5069 - auth_hash_seg_entry, Start
B -      7212 - auth_hash_seg_exit, Start
B -    578516 - elf_segs_hash_verify_entry, Start
B -    694685 - PBL, End
B -    694709 - SBL1, Start
B -    785043 - pm_device_init, Start
D -         7 - pm_device_init, Delta
B -    786569 - boot_flash_init, Start
D -     57407 - boot_flash_init, Delta
B -    848121 - boot_config_data_table_init, Start
D -      3845 - boot_config_data_table_init, Delta - (419 Bytes)
B -    855602 - clock_init, Start
D -      7577 - clock_init, Delta
B -    867353 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:6
B -    870766 - sbl1_ddr_set_params, Start
B -    875862 - cpr_init, Start
D -         2 - cpr_init, Delta
B -    880244 - Pre_DDR_clock_init, Start
D -         5 - Pre_DDR_clock_init, Delta
D -     13174 - sbl1_ddr_set_params, Delta
B -    893557 - pm_driver_init, Start
D -         3 - pm_driver_init, Delta
B -    964235 - sbl1_wait_for_ddr_training, Start
D -        27 - sbl1_wait_for_ddr_training, Delta
B -    980400 - Image Load, Start
D -    138336 - QSEE Image Loaded, Delta - (269176 Bytes)
B -   1119170 - Image Load, Start
D -      1435 - SEC Image Loaded, Delta - (2048 Bytes)
B -   1129483 - Image Load, Start
D -    220034 - APPSBL Image Loaded, Delta - (450356 Bytes)
B -   1349914 - QSEE Execution, Start
D -        60 - QSEE Execution, Delta
B -   1356137 - SBL1, End
D -    663504 - SBL1, Delta
S - Flash Throughput, 2007 KB/s  (721999 Bytes,  359620 us)
S - DDR Frequency, 672 MHz


U-Boot 2012.07 (Dec 05 2017 - 16:05:06)

smem ram ptable found: ver: 1 len: 3
DRAM:  512 MiB
machid : 0x8010006
NAND:  ONFI device found
ID = 9590dcc2
Vendor = c2
Device = dc
SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB
ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x400000
516 MiB
In:    serial
Out:   serial
Err:   serial
machid: 8010006
flash_type: 0
Configurate GPIO setting
Configurate TPM reset from low to high.
Configurate BLE reset from low to high.
Net:
PHY ID = 0x4dd072, eth0 found AR8035 PHY
MAC0 addr:7c:5a:1c:2:d0:b8
eth0
Creating 1 MTD partitions on "nand0":
0x000000000000-0x000020000000 : "mtd=0"
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
UBI: attached mtd2 to ubi0
UBI: MTD device name:            "mtd=0"
UBI: MTD device size:            512 MiB
UBI: number of good PEBs:        4096
UBI: number of bad PEBs:         0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     4
UBI: available PEBs:             2596
UBI: total number of reserved PEBs: 1500
UBI: number of PEBs reserved for bad PEB handling: 40
UBI: max/mean erase counter: 6/1
SF: Detected GD25Q32 with page size 4 KiB, total 4 MiB
Hit any key to stop autoboot:  0
Read 0 bytes from volume image to 88000000
No size specified -> Using max size (67170304)
## Booting kernel from FIT Image at 88000000 ...
   Using 'config@1' configuration
   Trying 'kernel@1' kernel subimage
     Description:  ARM OpenWrt Linux-3.14.43
     Type:         Kernel Image
     Compression:  uncompressed
     Data Start:   0x880000e4
     Data Size:    16839844 Bytes = 16.1 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x80208000
     Entry Point:  0x80208000
node name: signature@1
     Sign algo:    sha256,rsa4096
     Sign value:   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
   Verifying Hash Integrity ... sha256+ OK
## Flattened Device Tree from FIT Image at 88000000
   Using 'config@1' configuration
   Trying 'fdt@1' FDT blob subimage
     Description:  ARM OpenWrt Sophos-APX device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x8900f8cc
     Data Size:    35149 Bytes = 34.3 KiB
     Architecture: ARM
node name: signature@1
     Sign algo:    sha256,rsa4096
     Sign value:   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
   Verifying Hash Integrity ... sha256+ OK
   Booting using the fdt blob at 0x8900f8cc
   Loading Kernel Image ... OK
OK
   Loading Device Tree to 871e3000, end 871ee94c ... OK
Using machid 0x8010006 from environment

Starting kernel ...

Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
Please press Enter to activate this console.
Booting. (Version: 11.0.020-1)
Checking The AP model
No Direct-Attach chipsets found.
qcawifi disable radio wifi0
qcawifi disable radio wifi1
qcawifi disable radio wifi0
qcawifi disable radio wifi1
Starting network configuration for ethernet interface over DHCP.
dnsserver entries are missing
UTM certificate validation pending.
dnsserver entries are missing
dnsserver entries are missing
Ethernet autoconfiguration (bound): IP:192.168.102.102/24, gateway:192.168.102.251, nameservers:192.168.102.251
Ethernet link state changed to: up, Speed: 100, Duplex: full
Ethernet link state changed to: down



Added TAGs
[edited by: Erick Jan at 5:04 AM (GMT -8) on 12 Jan 2024]
Parents Reply Children