Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 7 replies
  • Answers 2 answers
  • Subscribers 14 subscribers
  • Views 3106 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to disable a radio in an APX120

rfcat_vk

Hi,

I want to disable the 2.4ghz radio in my APX120 because it is interfering with other devices? I have set the power to 10%, but that is not the answer.

Ian



This thread was automatically locked due to age.
Parents
  • 0

    I have the same issue. I have a 5Ghz only SSID (across 5 access points).  If leave the default settings I get about 55Mbs download on my WAP. If I dial down the 2.4Ghz to 10% I get 120 Mbps. 

    There are no SSID using 2.4. it would be a great feature to either switch off 2.4 or dial down to zero.

Reply
  • 0

    I have the same issue. I have a 5Ghz only SSID (across 5 access points).  If leave the default settings I get about 55Mbs download on my WAP. If I dial down the 2.4Ghz to 10% I get 120 Mbps. 

    There are no SSID using 2.4. it would be a great feature to either switch off 2.4 or dial down to zero.

Children
Unfiltered HTML