Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 13 subscribers
  • Views 2005 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Use Central Wireless with XG to filter traffic

MikeGillan

I'm trialling Central Wireless instead of having each of my sites XG manage the APs there.

I've migrated an AP to Central.  That's all fine.  However, I need to ensure that the the SSIDs that I broadcast (one LAN, one guest and one public access) get the appropriate web filtering etc as they currently do.

Apparently I need to configure XG firewalls to do this, but I don't know where I'm looking to do this with APs that are "managed" by Central.

Anybody done this and can point me in the right direction?

Thanks

Mike



This thread was automatically locked due to age.
Parents
  • 0

    You should implement VLAN Tagging in your concept.

    Then use the AP / APX in Central to bridge into VLAN.

    The VLAN is managed by XG, so the gateway of all VLANs is the XG. Therefore you can configure the proper Security settings based on the VLAN.

    Per SSID you would create an own VLAN. 

    __________________________________________________________________________________________________________________

Reply
  • 0

    You should implement VLAN Tagging in your concept.

    Then use the AP / APX in Central to bridge into VLAN.

    The VLAN is managed by XG, so the gateway of all VLANs is the XG. Therefore you can configure the proper Security settings based on the VLAN.

    Per SSID you would create an own VLAN. 

    __________________________________________________________________________________________________________________

Children
Unfiltered HTML