Overview
The v2.1.3-2 release brings a number of bug fixes which help to deliver an overall better Wi-Fi experience.
Bug Fixes
Issue Key
Summary
CWIFI-10091
Few client disconnections are observed when Rogue AP is enabled
CWIFI-10655
Auth DOS Attack: Kernel crash observed on APX320
CWIFI-10522
Legacy AP models AP100/55 does not support more than 120 clients per radio
CWIFI-9412
CVE-2018-14526: Unauthenticated EAPOL-Key decryption in wpa_supplicant
CWIFI-10193
AP does not allows the user to connect again after mac filter update
CWIFI-10605
Mesh: AP TX/RX Workload (zero) and Memory (51%) for MESH AP
CWIFI-10565
Legacy AP100/55 crashes and reboots when 124 or more clients connected on 2.4Ghz radio
CWIFI-10559
AP Channel list: Country specific channels are not getting updated on Cloud UI after 'sites' change
CWIFI-9403
CVE-2018-0732 - Openssl “denial of service during forward secrecy setup
CWIFI-10153
Captive portal: user can't enable client isolation for Captive portal based SSID profile
CWIFI-9440
5GHz SSID not broadcasting in APX320 when mesh in enabled
CWIFI-10189
Channel change events are seen for the AP where channel is manually configured.
CWIFI-10329
APX 320 (ROW): Cloud UI shows channel 36 for Indonesia ( 5.150-5.725 disabled ) & Ch width 40MHz
CWIFI-10191
APs are going down/inactive due to kernel panic
CWIFI-10525
SSID with (Captive portal + dynamic vlan) Configuration Should Not be Allowed
CWIFI-10232
Slider control for scheduling settings for network availability is not working when it's start or end point set to 11 PM
Known Issues
CWIFI-10343
Intel-8265 chipset (Window 2010) clients are not getting associated when Fast roaming is enabled.
Note : Disable Fast roaming under SSID config if Intel-8265 chipset clients are present in the network.
Windows 2010? I assume you mean Windows 10 ?