Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 8 replies
  • Answers 2 answers
  • Subscribers 41 subscribers
  • Views 17043 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Has anyone tried installing XG on ASG 110/120 version 4?

jang430

I did before, but after some time, an hour or so running, cpu utilization will increase to 99%. By then, all internet traffic will stop. I went to check running services, and when i restart web proxy service, usage will drop to 3% and climb up again after some time. Is this machine not capable of the sfos?



This thread was automatically locked due to age.
Parents
  • +1

    I'm running XG on a UTM 120 rev. 5 without any issues other than the interfaces is in reverse order.

    Sophos UTM 9.3 Certified Engineer
    Sophos UTM 9.3 Certified Architect
    Sophos XG v.15 Certified Engineer
    Sophos XG v.17 Certified Engineer
    Sophos XG v.17 Certified Architect

  • 0 in reply to KennethHolmqvist

    Yes,  aware of the reverse nic issue. Not a problem.

    Do you know what's the difference between v4 and v5?

    How many users are using at the same time? Don't you have cpu utilization issues?

  • 0 in reply to jang430

    There is 2GB memory and a Intel atom 1.66GHz N450 cpu in my rev. 5..

    Mine is only using 5~10% cpu. But again there's only two users on the box, 2 IPSec tunnels, webfilter and IPS is enabled on the LAN zone

    Sophos UTM 9.3 Certified Engineer
    Sophos UTM 9.3 Certified Architect
    Sophos XG v.15 Certified Engineer
    Sophos XG v.17 Certified Engineer
    Sophos XG v.17 Certified Architect

Reply
  • 0 in reply to jang430

    There is 2GB memory and a Intel atom 1.66GHz N450 cpu in my rev. 5..

    Mine is only using 5~10% cpu. But again there's only two users on the box, 2 IPSec tunnels, webfilter and IPS is enabled on the LAN zone

    Sophos UTM 9.3 Certified Engineer
    Sophos UTM 9.3 Certified Architect
    Sophos XG v.15 Certified Engineer
    Sophos XG v.17 Certified Engineer
    Sophos XG v.17 Certified Architect

Children
Unfiltered HTML