Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 8 replies
  • Answers 2 answers
  • Subscribers 41 subscribers
  • Views 17043 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Has anyone tried installing XG on ASG 110/120 version 4?

jang430

I did before, but after some time, an hour or so running, cpu utilization will increase to 99%. By then, all internet traffic will stop. I went to check running services, and when i restart web proxy service, usage will drop to 3% and climb up again after some time. Is this machine not capable of the sfos?



This thread was automatically locked due to age.
Parents
  • 0

    Officially only SG model are supported. Utm are old Astaro/Sophos models and you can try to use them installing the SW version of XG.

    Version 4 and 5 have different amount of RAM and Cpu model.

  • 0 in reply to lferrara

    Yeah, it's old. Since it's for home,  I thought it should be good enough.  The ram I can upgrade.  But I don't know how the processor is different.  My existing uses dual core atom 1.6.  Is this not yet enough for xg home use?

  • 0 in reply to jang430

    Jason,

    Did you have the cpu issue even after the XG installation with no rule?

    I am using a old dc2500cc Intel MB with an Atom Dual core 1.86 with 20 rules and IPS applied in some of them with no issue.

    Check your config by disabling IPS on all rules and see if the cpu usage goes down.

Reply
  • 0 in reply to jang430

    Jason,

    Did you have the cpu issue even after the XG installation with no rule?

    I am using a old dc2500cc Intel MB with an Atom Dual core 1.86 with 20 rules and IPS applied in some of them with no issue.

    Check your config by disabling IPS on all rules and see if the cpu usage goes down.

Children
  • 0 in reply to lferrara

    After installation, it was orange ever since.  I started using it for over a week, without problems.  All of a sudden, a week after, cpu utilization started going up.  Can't remember if I've changed anything, as I was playing with it.  I basically have 2 rules only.

    After restarting web proxy, utilization goes down immediately.

    I'm using web filtering, as that is my main goal.  Is web proxy = web filtering? 

Unfiltered HTML