Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 41 subscribers
  • Views 10195 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Origin Download Fix

Jean-MarcBélanger

As some of you may know, Origin is a game client that enable you to play games purchased from EA Games conglomerate.  My question is where do I have to go to disable this?  It was dead simple on UTM Firewall, but not so on the new Sophos home.  There is a solution, but it applies to the old UTM version.

I have a list of ports to open, but I can't find where this is done or implemented.


Regards,

JMB



This thread was automatically locked due to age.
Parents
  • 0

    Some places to start. I don't have time at the moment to post the details of how to do this, just some quick guides that might help get you started.

    you need to create a policy that does not use the http proxy.

    You might need two policies, one for incoming and the other for outgoing if everything goes together correctly.

    Setup port groups into one group.

    I suspect you will need to have authenicated users rather than clientless users to get the ports setup to work. All my experience at this stage is with clientless users.

    Look at allowing the authenticated users in this policy/ies, you will need to activate them.

    Ian,

    home UTM 9.x running in ESXi 6 e3-1275v2

    AP55c and AP10 (courtesy Astaro)

    Three other UTMs, SUM and SFM in hibernation

    XG 15.x MR3 in hibernation

Reply
  • 0

    Some places to start. I don't have time at the moment to post the details of how to do this, just some quick guides that might help get you started.

    you need to create a policy that does not use the http proxy.

    You might need two policies, one for incoming and the other for outgoing if everything goes together correctly.

    Setup port groups into one group.

    I suspect you will need to have authenicated users rather than clientless users to get the ports setup to work. All my experience at this stage is with clientless users.

    Look at allowing the authenticated users in this policy/ies, you will need to activate them.

    Ian,

    home UTM 9.x running in ESXi 6 e3-1275v2

    AP55c and AP10 (courtesy Astaro)

    Three other UTMs, SUM and SFM in hibernation

    XG 15.x MR3 in hibernation

Children
No Data
Unfiltered HTML