Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 41 subscribers
  • Views 13174 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos XG Firewall Home Edition - unable to boot after installation - hard drive cannot be booted from

James652

Hi,

I have just completed the install for the Sophos XG Firewall onto a machine on my network. On installation finish, I removed the CD as prompted to and pressed 'y' to reboot the machine. The drive in which the firewall was installed to is unable to be booted from. There are no errors on attempt - it simply attempts to boot from LAN instead.

I've attempted this install twice. both times have been unsuccessful.

Any ideas?

Thanks

-James



This thread was automatically locked due to age.
Parents
  • 0

    How many drives are installed in the machine?

    Is the software capable of writing to the drive.

    W10 more than likely will not recognise a linux drive or partitions.

    Ian,

    home UTM 9.x running in ESXi 6 e3-1275v2

    AP55c and AP10 (courtesy Astaro)

    Three other UTMs, SUM and SFM in hibernation

    XG 15.x MR3 in hibernation

Reply
  • 0

    How many drives are installed in the machine?

    Is the software capable of writing to the drive.

    W10 more than likely will not recognise a linux drive or partitions.

    Ian,

    home UTM 9.x running in ESXi 6 e3-1275v2

    AP55c and AP10 (courtesy Astaro)

    Three other UTMs, SUM and SFM in hibernation

    XG 15.x MR3 in hibernation

Children
No Data
Unfiltered HTML