Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Creating VLAN on different zone than LAN - BUG

This morning I created additional zone on my XG at home, then I was trying to create VLAN on this zone. After clicking apply, nothing happens with no error.

Created another zone and attempt to create an additional VLAN, same issue.

So I created the VLAN on LAN zone then I moved the VLAN to the desired zone.


Where is the limitation? No error messages?

Thanks,

Luk



This thread was automatically locked due to age.
Parents
  • Hi Luk
    Good spot, thanks for raising this.
    I've reproduced the same symptoms here. I'll do some further investigation into this and let you know the outcome
    Greg

  • Thank you Greg.
    Let us know.
  • Just a quick update on this. We do already have this logged as a bug and expect this to be fixed in a future update. I don't have a specific version number yet I'm afraid..

    The issue isn't specific to custom zones, but instead occurs when creating a vLAN interface on any zone that doesn't have a remote HTTP/HTTPS device access enabled on it.
    So another workaround for this would be to create the custom zone and enable HTTPS access from it (System > Administration > Device Access). This should allow the vLAN interfaces to be created and may help those that need to create a large number of vLAN interfaces in the short term.

    Greg
  • Thank you GregH.
    Good to know that. Anyway for the moment I prefer to create additional VLAN to LAN zone then move the VLAN to proper zone.

    Waiting for next XG release.
    Luk
Reply Children