Remote IPSEC VPN doesn't work after configure SD-WAN route

Hi Ravin,

Thank you for reaching out to Sophos Community.

Kindly check the following KB for reference

• Configure SD-WAN routes
• SD-WAN routing behavior

Also, make sure your routing table has higher precedence for the VPN routes over SD-WAN routes. You may check the following 

• Allowing traffic flow for directly connected networks: Set route precedence

Hi Ravin,

Thank you for reaching out to Sophos Community.

Kindly check the following KB for reference

• Configure SD-WAN routes
• SD-WAN routing behavior

Also, make sure your routing table has higher precedence for the VPN routes over SD-WAN routes. You may check the following 

• Allowing traffic flow for directly connected networks: Set route precedence

Hi Erick,

Great! After reading the mentioned KB, I now understand the concept of traffic flow. I have re-adjusted the route precedence, VPN traffic as the first priority, followed by static routes and SD-WAN.

Thanks, man! I achieved what I wanted.

Hi Ravin,

That is great to hear. Thank you for the update.