Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 10 replies
  • Answers 1 answer
  • Subscribers 41 subscribers
  • Views 1842 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Re-enable the Mgmt Port after Backup/Restore from a device that didn't have one

CraigLloyd

Hi,

I'm currently preparing our new XGS3300 to migrate from our XG310 which is soon end of life.

I've done a Config Backup from the XG310 and applied it to the XGS3300 which was successful apart from the XGS3300 MGMT Port is now disabled.

Is there anyway I can re-enable the Dedicated MGMT Port from the Front Panel or Console/Advanced Shell?

I was hoping to setup the XGS3300 together with it's HA partner via the MGMT port before shutting down the XG310 pair and moving the cables.

Any help appreciated

Thanks,

Craig



This thread was automatically locked due to age.
Parents
  • 0

    Did you try the new Backup / Restore Wizard in SFOSv20.0 MR2? 

    __________________________________________________________________________________________________________________

  • 0 in reply to LuCar Toni

    Yes, I did, firstly with the XGS3300s in HA configuration and watching the dedicated video. This failed and the config didn't apply.

    So needed to factory reset the devices.

    Second attempt using the Wizard, I restored to just one XGS3300 without the HA, this worked, but as my original post says, it disables the MGMT port. There is no prevision to manage what happens to the MGMT port during the wizard so it just got deactivated.

    Anyway. I've worked around the issue now as detailed in my last reply to LHerzog above.

Reply
  • 0 in reply to LuCar Toni

    Yes, I did, firstly with the XGS3300s in HA configuration and watching the dedicated video. This failed and the config didn't apply.

    So needed to factory reset the devices.

    Second attempt using the Wizard, I restored to just one XGS3300 without the HA, this worked, but as my original post says, it disables the MGMT port. There is no prevision to manage what happens to the MGMT port during the wizard so it just got deactivated.

    Anyway. I've worked around the issue now as detailed in my last reply to LHerzog above.

Children
No Data
Unfiltered HTML