Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 41 subscribers
  • Views 6533 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

NOT RECEIVING THE INCOMING TRAFFIC FROM VPN TUNNEL

Jackson Awe

Hello guys,
I really need your help i am facing the challenge since am not receiving the traffic from remote machine i have attached the captured traffic and denied logs from the specific

machine....i can reach the remote machine by ping and telnet in time but only when i Curl the endpoint API of the server i can reach it but the response will take a time until i get Gateway time out....I am using Sophos XG115



This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to Jackson Awe

    Please check by creating a test firewall rule from VPN-LAN with MASQ applied and keep the firewall rule and NAT rule on TOP as per the below step : 

    Please go to Configure-->Routing-->Static routing and share current route if added.

    Check the packet again after you created the above test rule.

    Regards

    "Sophos Partner: Networkkings Pvt Ltd".

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data
Unfiltered HTML