Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Reset button XGS 126 does nothing

I have an XGS 126W. It has been sitting in a closet since end of 2022. At that time it had all the updates installed, not exactly sure what version. 

Now what it's out of the closet (no pun intended), I can't connect to it. No matter what port I connect the computer, it do not get an IP.

I like to push buttons so I went for the factory reset button. Holding the reset button for 10 sec or more, than releasing it, does nothing. (I also tried the alternate method for the XGS 87, XGS 107). Any idea how to reset it?

I then used the micro USB to USB cable and connected the PC to the COM port on the front of the appliance, but I cannot find it in PuTTY, 

Not sure what else to try. Thanks,



This thread was automatically locked due to age.
Parents
  • Hi,

    Colud be the reason it was in the closet? Check the power supply is putting out enough voltage?
    ian

    XG115W - v20.0.3 MR-3 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • Hi,

    Colud be the reason it was in the closet? Check the power supply is putting out enough voltage?
    ian

    XG115W - v20.0.3 MR-3 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children