Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 4 replies
  • Subscribers 41 subscribers
  • Views 3380 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Reset button XGS 126 does nothing

YYC

I have an XGS 126W. It has been sitting in a closet since end of 2022. At that time it had all the updates installed, not exactly sure what version. 

Now what it's out of the closet (no pun intended), I can't connect to it. No matter what port I connect the computer, it do not get an IP.

I like to push buttons so I went for the factory reset button. Holding the reset button for 10 sec or more, than releasing it, does nothing. (I also tried the alternate method for the XGS 87, XGS 107). Any idea how to reset it?

I then used the micro USB to USB cable and connected the PC to the COM port on the front of the appliance, but I cannot find it in PuTTY, 

Not sure what else to try. Thanks,



This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to PhilippRusch

    I tried again with the micro USB serial, but this time I paid attention to PuTTY parameters, and I had the speed rate wrong. Once I set it to 38400, I was able to connect and log into the firewall. 

    I am still puzzled why the hard reset button would not work. 

    Thank you. 

Unfiltered HTML