Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 39 subscribers
  • Views 1586 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos XGS chnage outgoing WAN Address

admin_idl

Hello,

We use several networks and several public IP addresses, which are stored as aliases on the WAN interface. How do I configure the NAT rule so that, for example, the public IP address xxx.xxx.xxx.xxx is used for network A and the address yyy.yyy.yyy.yyy.yyy is used for network B? We want to communicate with the Internet via different IP addresses. What would be the best solution for this?

Thank you!



This thread was automatically locked due to age.
Parents
  • 0

    For IP Change (ALIAS IPs on the same Interface) you can use a SNAT Rule. Simply create a SNAT and use the wanted IP as translated Source IP. 

    __________________________________________________________________________________________________________________

Reply
  • 0

    For IP Change (ALIAS IPs on the same Interface) you can use a SNAT Rule. Simply create a SNAT and use the wanted IP as translated Source IP. 

    __________________________________________________________________________________________________________________

Children
Unfiltered HTML