Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 41 subscribers
  • Views 1017 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Azure virtual networks with sopho xg firewall

johnie_PM

i have two vnets in resource group.

vnet1 network address is 192.168.0.0/16.

Wan subnet is 192.168.100.0/24

Lan subnet is 192.168.200.0/24

Sopho Xg firewall is deploy in this subnet. Wan portB interface ip address is 192.168.100.4/24 and Lan portA interface ip address is 192.168.200.4/24 respectively.

i deploy one route table and set default route to 0.0.0.0/0 with nexhop address xg appliance 192.168.200.4. And associate Lan subnet 192.168.200.0/24 and test-subnet 10.0.0.0/24  to this route table.

And i deployed one virtual machine called LanVM in Lan subnet.

vnet2 network address is 10.0.0.0/16.

test-subnet is 10.0.0.0/24.

And I deployed one virtual machine called testvm in test-subnet.

My question is that can i ping testvm and lanvm vice visa without vnet peering. Can I allow the traffic between testvm and lanvm from sopho firewall.? Any static route require for this purpose?

please suggest me.

Best Regards,

Johnie Zaw



This thread was automatically locked due to age.
Unfiltered HTML