Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 40 subscribers
  • Views 731 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cannot adopt Unifi WAP using Sophos XGS

Sheldon Trewin

I have a Unifi USQ Pro 8-port connected to my Sophos XGS116 using an LC duplex fiber cable. No problems! Can adopt Unifi WAPS connected directly to the Sophos switch. All DHCP server info is being passed nicely from the Sophos firewall to the Unifi switch.

However, when I plug a Unifi WAP directly into a port in the back of my Sophos unit (all LAN ports are bridged to work like a switch) the WAP is found, address is found, adoption starts then fails.

I've read dozens of help posts online but cannot seem to get this to work. Any help would be appreciated!!!



This thread was automatically locked due to age.
  • 0

    Hi,

    What device is accepting the Unfi APs? Please check logviewer and run a PCAP on the port when you connect the AP. I suspect that the XG is not passing some basic WIFI configuration information that normally only goes to the switch which.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 EAP

    If a post solves your question please use the 'Verify Answer' button.

Unfiltered HTML