I already added the server port and created the rule but I get this error.

Hi,

are you using WAF or just firewall rules?

If firewall rules please post a copy.

Ian

just firewall rules

The server's IP is 172.10.5.180 and we want it to go out through a public one, which is Port2, like the one in the photo is https://201.151.88.148:8090/

Hi Patricio Gómez 

Please check and verify firewall rule and NAT rules flows under MONITOR & ANALYZE || Diagnostics || Packet Capture passing from the same DNAT rules created as above ?.

Make sure the server is reachable with a ping test from the firewall and ports with a telnet test.

Configuration link : https://docs.sophos.com/nsg/sophos-firewall/19.5/Help/en-us/webhelp/onlinehelp/index.html?contextId=rules-policies-NAT-add-assistant 

Regards

Hello, good morning, I have already created the firewall and nat rules but it remains the same without communication with the server.

We have a server made in virtualbox, I don't know if there are problems with that?

Please share ping and packet capture output

Please try changing your destination network to a network address (or network address range eg 10.10.10.0/24 not just the port address.

Ian

Please try changing your destination network to a network address (or network address range eg 10.10.10.0/24 not just the port address.

Ian