Sophos XG115 F/W v19.5 : Opening a range of ports

Hey Chandrashekhar Dahale , thank you for reaching out to the community, have a quick overview by referring the kba here - : Create port address translation rule for traffic to internal servers.

I have been through this KB. IT works if I do it for a single port. The issue is   I need to do it for a range of ports 40000 to 60000.

I have created a service already. I hope it is correct.

When I put it in the rule, it does not work. I just need to now how to do it for a range of port numbers. Whether there is some other way of creating service Or some different rule is to be applied

You have created a perfect service object to allow a range, but now if it is not working then check on couple of things like if you have a upstream router where the following range is allowed or not ? Or any of the services blocked from the ISP end ?

You have created a perfect service object to allow a range, but now if it is not working then check on couple of things like if you have a upstream router where the following range is allowed or not ? Or any of the services blocked from the ISP end ?