Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 46 replies
  • Answers 5 answers
  • Subscribers 43 subscribers
  • Views 15658 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XG 125w rev.3 Home License Registation Problem

Rod Ney

I am wondering if anyone can assist me with the registration of my device XG125W. When I try to register/claim the firewall using the serial number of the device, I receive one of two error's.

Error 1, Licensing,Ficewall licenses, Claim firewall, Enter Serial number and click on validate, Claim firewall Just claim the firewall with base license click on claim firewall. Error Failed to claim firewall please try again later.

Or Error 2, Devices Firewall, Add Firewall, enter device Serial number, Claim Firewall and continue. 400: A Bad request was made.

I have changed the hard drive as suggested on here and reflashed the device using HW-v19.5.3 MR3 firmware, I have tried to put the home license product key in with no success using any of the methods.

E.g CLI, Sophos Central or Web UI, during the inital setup, I either get an error after a few seconds, when using the Web UI saying I have no internet connection which then turns green again. As soon as I try it again I get the same issue. When using the CLI, I can see the WAN & LAN has activity but as soon as I use AA command and use the home key, it drops all connections. When trying to use the Sophos Central I get the error as described above.

If anyone could help me with this issue it would be very much appreciated.



This thread was automatically locked due to age.
  • 0 in reply to Rod Ney

    Hi, were you able to get it installed? I'm thinking about buying a used XG135, but like to find out if you got it working first.

  • 0 in reply to 333robbie333

    No unfortunately, this is still unresolved, I have tried everything that has been suggested here and have gotten no further with it. I purchased a SG450 which I got flashed with no issue at all and as I don't have a business subscription Sophos won't help me with this issue even though I have explained I have tried to ask here on the community for help and can't get it resolved unfortunately.

    Could just be bad luck and wasted money on using the sophos FW but I am looking at having to install Pfsense on it which is not what I wish to have to do.

  • 0 in reply to Rod Ney

    Cool! Thanks for the quick response. I wanted to suggest installing Pfsense just so you can at least use it. Glad you got another solution 

  • 0 in reply to Rod Ney

    HI,

    did you take the disk drive out and format it using a linux formatter or replace the drive entirely?

    Ian

    XG115W - v20.0.3 MR-3 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    Hi rfcat_vk Yes I have tried both and even tried 2 different drives but it hasn't helped. I have looked all over the internet for answers to how to resolve this issue. I have even tried using a different internet connection not that I see why that would have made a difference when I had no issues at all setting up the SG450.

  • 0 in reply to Rod Ney

    Does the bios on the XG only work with UEFI install which is not supported on the SFOS installer.

    Ian

    XG115W - v20.0.3 MR-3 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    Sorry I am a bit confused in what you mean?

    The way I have tried to do the home firewall firmware flash is the same way as I did it on my SG450. 

    The steps I did was done by downloading the firmware, then writing the image file to the USB using rufus and then tried to flashed it. 

    All of this is above as I have explained before but it is very confusing as to why it won't work with the original drive, and when I change the drive it doesn't allow me to register even though I have tried about 3 different serial/ registration numbers.

  • 0 in reply to Rod Ney

    Just a dumb question, maybe try to follow all these steps in this video on YouTube. At the time of your first post, the video did not exist. He restored all defaults on the BIOS on the XG 135, maybe something to try if you haven't already?

  • 0 in reply to Rod Ney

    Have you tried defaulting your BIOS settings?

  • 0 in reply to Rod Ney

    Hello Rod,

    I think we have to clarify a bit here: Home licenses does only work with the software image "SFVH", not with a hardware image of SFOS.

    The hardware image is coupled to the system hardware serial number, so this would not accept any other license than the correct one for the hardware model you got. Home licenses instead are given out without knowing your "fw model", because this is the way it is meant.

    The SSD/HDD drive has a file, where the syste, stores its model, type and serial number, if this is a Sophos piece of hardware. So this may have worked on the old "SG" type of firewall, because this file wasn't in place. On a "new" XGS system, you either have to wipe the drive completely or use a new drive. That's the whole secret.

    Mit freundlichem Gruß, best regards from Germany,

    Philipp Rusch

    New Vision GmbH, Germany
    Sophos Silver-Partner

    If a post solves your question please use the 'Verify Answer' button.

Unfiltered HTML