Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 46 replies
  • Answers 5 answers
  • Subscribers 44 subscribers
  • Views 15348 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XG 125w rev.3 Home License Registation Problem

Rod Ney

I am wondering if anyone can assist me with the registration of my device XG125W. When I try to register/claim the firewall using the serial number of the device, I receive one of two error's.

Error 1, Licensing,Ficewall licenses, Claim firewall, Enter Serial number and click on validate, Claim firewall Just claim the firewall with base license click on claim firewall. Error Failed to claim firewall please try again later.

Or Error 2, Devices Firewall, Add Firewall, enter device Serial number, Claim Firewall and continue. 400: A Bad request was made.

I have changed the hard drive as suggested on here and reflashed the device using HW-v19.5.3 MR3 firmware, I have tried to put the home license product key in with no success using any of the methods.

E.g CLI, Sophos Central or Web UI, during the inital setup, I either get an error after a few seconds, when using the Web UI saying I have no internet connection which then turns green again. As soon as I try it again I get the same issue. When using the CLI, I can see the WAN & LAN has activity but as soon as I use AA command and use the home key, it drops all connections. When trying to use the Sophos Central I get the error as described above.

If anyone could help me with this issue it would be very much appreciated.



This thread was automatically locked due to age.
Parents
  • 0

    Since you are talking about a home license (but on a hardware device) and have changed the harddrive.

    Which serial number are you using when trying to register? You should NOT use the hardware serial of the XG125 but instead use the serial that you got when registering for the home use license.

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

  • 0 in reply to apijnappels

    Yes that is exactly what I am trying to do but for whatever reason it is not accepting the home license. A friend has a SG 450 that is running on a home license which I was present when they set it up from a fresh firmware flash with no issues at all. Hence I know what the process is for getting it up and running using the home license that is provided for free by sophos. But it is not working for whatever the reason is. I even took the XG 125W over to their house the other night to see if using a different Internet connection would help but it hasn't made the slightest difference in trying to get it to register the home license. Both of us have tried to get this up and running for god knows how long now but with no luck unfortunately which has left me with basically an expensive door stop as I can't get this up and running and I can't call Sophos support as it is a home license and not a business. I would love to get this working so I can then start using it and secure my network better plus start learning more.

  • 0 in reply to Rod Ney

    To me it sounds like the ports are blocked by your ISP? Do you have a hotspot on your phone you could connect through?

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    I have a SG450 that I have manged to setup so I don't think it is my ISP blocking the ports. Unless the XG 125w uses different ports.

  • 0 in reply to Rod Ney

    Hi, were you able to get it installed? I'm thinking about buying a used XG135, but like to find out if you got it working first.

  • 0 in reply to 333robbie333

    No unfortunately, this is still unresolved, I have tried everything that has been suggested here and have gotten no further with it. I purchased a SG450 which I got flashed with no issue at all and as I don't have a business subscription Sophos won't help me with this issue even though I have explained I have tried to ask here on the community for help and can't get it resolved unfortunately.

    Could just be bad luck and wasted money on using the sophos FW but I am looking at having to install Pfsense on it which is not what I wish to have to do.

  • 0 in reply to Rod Ney

    Cool! Thanks for the quick response. I wanted to suggest installing Pfsense just so you can at least use it. Glad you got another solution 

  • 0 in reply to Rod Ney

    HI,

    did you take the disk drive out and format it using a linux formatter or replace the drive entirely?

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    Hi rfcat_vk Yes I have tried both and even tried 2 different drives but it hasn't helped. I have looked all over the internet for answers to how to resolve this issue. I have even tried using a different internet connection not that I see why that would have made a difference when I had no issues at all setting up the SG450.

  • 0 in reply to Rod Ney

    Does the bios on the XG only work with UEFI install which is not supported on the SFOS installer.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    Sorry I am a bit confused in what you mean?

    The way I have tried to do the home firewall firmware flash is the same way as I did it on my SG450. 

    The steps I did was done by downloading the firmware, then writing the image file to the USB using rufus and then tried to flashed it. 

    All of this is above as I have explained before but it is very confusing as to why it won't work with the original drive, and when I change the drive it doesn't allow me to register even though I have tried about 3 different serial/ registration numbers.

  • 0 in reply to Rod Ney

    Just a dumb question, maybe try to follow all these steps in this video on YouTube. At the time of your first post, the video did not exist. He restored all defaults on the BIOS on the XG 135, maybe something to try if you haven't already?

Reply Children
No Data
Unfiltered HTML