BGP - exclude a network from learning

Question

My other other end BGP peer advertises a lot of network, including my side local network. I want my end device to exclude one network from learning (like 192.168.2.0/24). 
 Are there any BGP commands for this.

Vivek Jagad · Accepted Answer

You can refer the following this might prove useful - BGP - Route Filters

ce_Sophos · Answer

I got this working. Just entered "prefix-list listname in" after neighbor command. XG CLi would not show this in the options. neighbor 169.214.179.65 prefix-list listname in

ce_Sophos · Answer

I got this working. Just added "prefix-list listname in" after neighbour command. It just worked. Prefix-list command does not show in CLI options. Still worked. Below is the full config; 
 router bgp 65000 bgp router-id 169.245.138.125 bgp log-neighbor-changes no bgp ebgp-requires-policy neighbor 169.2 45.138.126 remote-as 64512 ! address-family ipv4 unicast network 192.168.2.0/24 neighbor 169.2 45.138.126 prefix-list hodc in exit-address-family ! exit ! ip prefix-list hodc seq 10 permit 10.10.0.0/20 ip prefix-list hodc seq 25 permit 192.168.0.0/24 le 32 
 
 **Note the le in prefix-list command is very important. Check www.cisco.com/.../irg_bgp2.html

BGP - exclude a network from learning

Top Replies