Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 39 subscribers
  • Views 2886 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Rack Mount Kit for Sophos XGS 126

Don Paul

Has anyone ran into the Rack mount kit for the XGS 126 holes not lining up.  If you screw in the front, the rear 2 do not line up.  If you do the opposite, the front hole will not line up. See attached picture as an example

I double checked and we do have the correct mounts for this Firewall.   



This thread was automatically locked due to age.
Parents
  • 0

    In the original packet there are 4 Rackmount-Plates. You need two of them. Which ones depend on mounting direction. Back to front or front to front. You have a closer look into instructions and probably try the other two parts! It will be correctly aligned, once figured out!

Reply
  • 0

    In the original packet there are 4 Rackmount-Plates. You need two of them. Which ones depend on mounting direction. Back to front or front to front. You have a closer look into instructions and probably try the other two parts! It will be correctly aligned, once figured out!

Children
  • 0 in reply to FFin

    Ok, going over this again.  I was doing this onsite, in a tight space and that was one issue I had.  The mounting preference due to the way it was being mounted would be in diagram 2b of the instructions.  It was a vertical mount, and I wanted the ports to be facing up to be easily accessible.  So for me, that would have been the "front" however, I am guessing I am incorrect there.  Therefore I put the "small bracket", which now I see is marked as "right", on the side I felt was the "right side".  Are you saying that small bracket should be on the other side, and the large wide mounting bracket with the adapter tray be on the other?

  • 0 in reply to Don Paul

    the ports are on the back


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Unfiltered HTML