XG 210 IPSEC DOWN FAILED PARSING IKE

Hello Simon BALAND ,

Thank you for reaching out to the community, it mostly looks like a config error either in the Local ID/Remote ID or in PSK/IPSec Profile(Re-key) settings. Please share the config screenshots if possible and also take the tcpdump on Port 500 or 4500, syntax: tcpdump -nei any Port 500 or Port 4500 while establishing the tunnel.

Hi, thanks for the quick answer.

Here is the config : (Remote : Azure)

Local/Remote ID are IPs. There are correct

PSK is correct from both side

I'll check quickly for tcpdump, keep you informed

I would also suggest to refer - Configuring an IPsec VPN Gateway Connection to Azure. Also check the Download VPN device configuration scripts for S2S VPN connections. Based on the vendor or select the generic and check if the IPsec profile configured matches ?

Hello,

it's not working yet

I haven't the xfrm4 interface nearby of WAN interface from the blue part

Should i create the connection from IP TUNNEL menu ? Why there is ipsec menu and IP TUNNEL ?

Thank you

Do you want to create an IPsec site-to-site (Policy based) or tunnel interface (xfrm) ?
you can refer - Sophos Firewall: Configuring an IPsec VPN Gateway Connection to Azure

Hello,

IPSEC tunnel, we have 2 links, the first worked great. Configuration is the same, remote id is azure too. 

On your documentation step 8 tells us to configurer xfrm1, but i have no interface like this on my xg

Hello,

IPSEC tunnel, we have 2 links, the first worked great. Configuration is the same, remote id is azure too. 

On your documentation step 8 tells us to configurer xfrm1, but i have no interface like this on my xg

xfrm will be created only if you opt for "Tunnel Interface" under the Site-to-site VPN > IPsec > Add > Connection type.