Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos SD-RED 20 and VLANs

Hello, I have the following scenario, I need to transport some VLANs that are on my core switch L3, behind the RED (Appliance), I have already tried to put the Firewall interface marked with the VLANs that I need, in Sophos I grouped the VLANs in a bridge, station behind RED gets ip from guest VLAN but does not browse.

I know it's not a good practice, but I need the Hotspot of my guest network, also in the branches.



This thread was automatically locked due to age.
Parents
  • This kind of design can work in smaller setups, but is not recommended for larger setups (Multiple REDs).

    You need to bridge the LAN port with the RED. Then place the VLANs as you want on this bridge. 

    You need to have Standard/Unified on RED to get this working. 

    __________________________________________________________________________________________________________________

Reply
  • This kind of design can work in smaller setups, but is not recommended for larger setups (Multiple REDs).

    You need to bridge the LAN port with the RED. Then place the VLANs as you want on this bridge. 

    You need to have Standard/Unified on RED to get this working. 

    __________________________________________________________________________________________________________________

Children