Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Migrate XG210 to XGS2100

HI,

I have our new XGS2100 to replace our XG210.

Do they both need to be on exactly the same firmware version before I take an export and carry out a restore?

XG210  SFOS 19.0.1 MR-1-Build365

XGS2100 SFOS 19.0.2 MR-2-Build472

After the import, will the new device need any config changes or should it work as the XG210 does now?

thanks



This thread was automatically locked due to age.
Parents
  • You need the same or newer Firmware to restore a Backup.

    There is the possibility to adjust the interfaces, as interface numbering could be different. 

    __________________________________________________________________________________________________________________

Reply
  • You need the same or newer Firmware to restore a Backup.

    There is the possibility to adjust the interfaces, as interface numbering could be different. 

    __________________________________________________________________________________________________________________

Children
  • Thank you for the quick reply. I update firmware so they are both now on SFOS 19.0.2 MR-2-Build472.

    If I backup from the XG210 and restore to the XGS2100 is that all I need to do?  

    We only use Port1 Lan and Port 2 Wan which are the same on the XGS ?