Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DHCP Reservation option

I have created DHCP scope in my Sophos XG230. Now i want to reserve one of the IP from that scope. How is that possible?

I don't want to use static DHCP reservation.



This thread was automatically locked due to age.
Parents
  • You assign the IP to the device and make sure the IP address is outside the DHCP scope range. Unlike most DHCP servers the XH DHCP server does not have the ability of comments about reserved addresses.

    They are either static or dynamic but not able to be reserved, yes, it is a very light version of a DHCP server.

    For the functions you are after you would be better off using an external DHCP server (external to the XG).

    Ian

    XG115W - v20.0.1 MR-1 - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.

  • I think a workaround, at least in v19 (but I think it was there in v18) would be to specify a set of dynamically-managed ranges that are non-contiguous and leave gaps where you want to either have statically-managed or "reserved" (unmanaged but not handed out).

Reply
  • I think a workaround, at least in v19 (but I think it was there in v18) would be to specify a set of dynamically-managed ranges that are non-contiguous and leave gaps where you want to either have statically-managed or "reserved" (unmanaged but not handed out).

Children
No Data