Sophos XG125w - Some strange issues and firewall rules not working

Hi,

are you sure the camera accepts traffic on port 80, mine use 9000 and remote access is done via the camera company’s website.

ian

Hey rfcat_vk

100% sure camera's use port 80, can access them on that port internally. 

Hi,

please post a copy of your firewall and Nat rules.

iaan

Firewall Rule

Nat Rule

Nat Reflexive Rule

Nat Loopback Rule

Also, this is the weird bug I'm getting with the WAN lInk Manger (even though it's online). I also tried to reboot the firewall in webconfig using Firefox and it said I was offline, I logged in with IE and I was able to reboot without issue:

Hi,

with WAN link  manager what are you testing against that gives a failed test? You could try using your ISPs DNS if it responds to pings?

Ian

ISP modem is in bridge mode. Wan link on firewall is set to DHCP. I'm using auto for the DNS too and it's getting the correct ISP DNS addresses too.

Sorry I'm not sure what you mean "testing against that gives failed test"? It's just that the WAN link manager and the dashboard show the WAN connection is down, even though I'm getting internet for the clients behind the firewall and I can ping google.com from a client and from diagnostics in the firewall. I've not seen the WAN link do this before for XG.

If you click on the entry in WAN link manager you will see connection testing settings.

Ian

rfcat_vk said:

you will see connection testing settings.

Interesting, I don't have that option in WAN Link Manager

I fixed WAN status offline. I found firewall could not ping isp gateway, added google dns for failover and that fixed it. Now how to fix firewall rules :-)

try changing your destination in the firewall rule to port2 network.

Ian