Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Lan and Wifi configuration

How can i configure PORT 1 with DHCP Ip range from 192.168.1.61 to 192.168.1.85 keeping gateway 192.168.1.1

Port 2 with DHCP Ip range from 192.168.1.100 to 192.168.115 while keeping gateway 192.168.1.1

Port 3with DHCP Ip range from 192.168.1..168.116 to 192.168.253 while keeping gateway 192.168.1.1

 

Port 1 will be kept for switch from where desktops will be connected &

On Port 2 and Port 3, on each of the port I want to directly connect my Tp link WiFi router as Acces point.

 

I want to know will this configuration work if yes than, will all the devices among all the 3 ports be able to communicate with each other as we are keeping same IP Ranges.

 

 

 



This thread was automatically locked due to age.