Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 42 subscribers
  • Views 1654 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Log Viewer issue

John Henry Vindas Carballo

Hello,

I have a XG85 running for a small office.

I decide to check some logs but for my surprise the only thing I can see in the IPS/Admin/Web Filter, etc is this:

Im running the latest firmware.

I can see the packets on the firewall tab but from time to time, I got those square brackets in between the packets.

 



This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to Badrobot

    Hello Badrobot,

     

    Usually, the CPU usage is 40%-50% and the Memory usage is about 70%.

  • 0 in reply to John Henry Vindas Carballo

    That is not horrible but not the best either.  Just to test it, can you disable a few things like IPS, Content and Malware Scanning for a short period to lower the CPU and memory and then see if the log viewer loads?  It would be interesting to see if it is timing out in some way due the the higher resource usage.

     

    Also, you can fine tweak things such as your IPS to only be protecting the systems/threats you have on your LAN.  For example, you do not need Linux IPS protection if you do not have a Linux box on your LAN.  This can help lower the overall CPU/RAM usage on the firewall.

     

    Respectfully, 

     

    Badrobot

     

Unfiltered HTML