Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 40 subscribers
  • Views 1989 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XG Home Edition - NIC Ports not Working but Recognized

Nicholas Howard

Hello everyone, 

 

I'm new here, so please bear with me. I'll also be traveling for work this week, so while I might get advice, I may not be immediately able to apply it.

 

I have a Dell Optiplex SFF 7020 with a haswell i3, 8GB of ram and an intel Pro 1000 Quad port (https://ark.intel.com/content/www/us/en/ark/products/50496/intel-pro-1000-pt-quad-port-server-adapter.html) That I've got Sophos XG up and running on. 

 

As of right now the only port that will go link lit is the onboard NIC on the MOBO. The ports on the NIC show up in the software, but they will not go link lit after plugging in or assigning an IP address. 

I'm hoping I can get some assistance here as I would like to run this at home and this hardware is what my budget allotted for. 



This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to Nicholas Howard

    Hi Nichiolas,

    all my low numbered ports are on the added card. My experience with using the 4 port NIC was working out which was the lower numbered-orr, in theory it is the lower number MAC address.

    Ian

    XG115W - v20.0.3 MR-3 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
  • 0 in reply to rfcat_vk

    rfcat_vk said:

    Hi Nichiolas,

    all my low numbered ports are on the added card. My experience with using the 4 port NIC was working out which was the lower numbered-orr, in theory it is the lower number MAC address.

    Ian

     

     

    So your telling me that the port numbering is done based on mac address and not how close it is to to the CPU?

  • 0 in reply to Nicholas Howard

    Hi Nicholas,

    my system has two onboard and two in dual NIC. The dual NIC start with A0 and are sorted by end, the onboard are started with 30 and sorted by end. I assume in XG configuration 'A' comes before '3'.

    Ian

    XG115W - v20.0.3 MR-3 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Unfiltered HTML