Issues with upgrading to new firmware on XG 230's.

Breakingcustom,

go to advanced shell via ssh connection, option 5 and then option 3 and write the command:

tail -f /log/u2d.log

tail -f /log/applog.log

(Use 2 ssh connection)

and then click on check new firmware on XG UI.

You should see the issue from one of the tail command.

Regards

I'll give that shot on the next one.  I was able to get the one XG to upgrade, by being local to the firewall (and after a reboot).

Thanks.

Basically had to be local to the firewall.  Do a reboot and then I was able to apply the firmware.

Basically had to be local to the firewall.  Do a reboot and then I was able to apply the firmware.