Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 15 replies
  • Subscribers 39 subscribers
  • Views 4333 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

NAT Inside Interface to OutSide Interface

Stephen Robertson

Good Evening, I am running 3CX.  My internal network is 172.16.10.0/24, but external is 192.168.0.0/24.  I need to NAT 172.16.10.14/24 port 5001 to 192.168.0.50.  I was able to get 192.168.0.50 active however it was only taking me to my XG for signin vs actually NAT'ing my internal device.  Please help



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    please your firewall rule.

    Your firewall should look like any - internal network -> any - > external network-> service port 5001 -> allow -> log

    You will not need MASQ.

    Ian

    XG115W - v20.0.3 MR-3 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    I tried that, I had to remove it, these are seperate interfaces, 172.16.10.x is on one interface and and 192.168.0.x is on another

  • 0 in reply to Stephen Robertson

    Hi,

    I suspect you have not explained your requirements very well.

    The pointing an internal port at the XG external will not achieve anything.

    The rule I suggested LAN, 172 network - WAN - 192 network port 5001 - allow - log will work.

    What you are not saying is where the 3CX is and what connections does it offer ? 3CX from memory is a digital PABX which you appear to be trying to use to provide internet gateway functions?

    Ian

    XG115W - v20.0.3 MR-3 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0 in reply to Stephen Robertson

    Hi,

    I suspect you have not explained your requirements very well.

    The pointing an internal port at the XG external will not achieve anything.

    The rule I suggested LAN, 172 network - WAN - 192 network port 5001 - allow - log will work.

    What you are not saying is where the 3CX is and what connections does it offer ? 3CX from memory is a digital PABX which you appear to be trying to use to provide internet gateway functions?

    Ian

    XG115W - v20.0.3 MR-3 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data
Unfiltered HTML