Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 3 replies
  • Subscribers 41 subscribers
  • Views 10048 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Realtek 8168 driver

rrosson

Just attempted to install XG on my system that is running UTM 9.x. Install went ok but the realtek interfaces would not connect or negotiate a proper speed with atone or setting them hard to 1G Full.

I am glad that I used a new drive for the install just for this reason.

I am on the hunt for a dual intel nic (suggestions welcome) to replace my realtek dual nic before I attempt again.

Recommend providing details of what actual hardware is supported since it looks like some device drivers have been removed from what UTM 9.x supports

TIA



This thread was automatically locked due to age.
Parents
  • 0
    One of the newer intel chipsets or a broadcom version will work well.

    I can't find anywhere to check hardware on my home version. I do know there are a later intel chipset, but which ones?


    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0
    One of the newer intel chipsets or a broadcom version will work well.

    I can't find anywhere to check hardware on my home version. I do know there are a later intel chipset, but which ones?


    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data
Unfiltered HTML